Well, not counting the 1/2 ton of Transmission Fluid you can load in the cargo bay...
For a simple drain and fill, it will need 5 quarts.
For a complete flush and fill, it will need 11.9 to 12.1 quarts..
When you get to that last quart, hold up adding more--start the engine and run it through the gears, shut down the engine and add the last quart.
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck
It don't have 1. you must remove the transmission pan to drain the fluid.
Standard Dexron III. GM cars all take that (at least in 1998).
Yes, they both had the same transmission options.
NO it will not. They are complete DIFFERENT designs. Will NOT interchange.
The transmission dipstick on a 1998 Blazer should be located at the rear of the engine. It should not be near the oil dipstick.
You can check the transmission fluid level in your 1998 Chevrolet Corvette with the transmission fluid dipstick. The transmission fluid dipstick will have indicating marks as to the level of the transmission fluid.
it a transmission slipping code
There is no manual band adjustment in that transmission. It is self adjusting.
HOW TO GET A PULLEY OFF A 1998 CHEVY BLAZER
Dextron II .
Check the dipstick, it will tell what fluid to use in that automatic transmission.