answersLogoWhite

0


Best Answer

0.260kW * 4h * $0.20/kWh = $0.208

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How much will a 260 watt heater cost to run for 4 hours if power costs 20 cents a kw?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How much does wave power cost?

it costs 2 dollars and 50 cents and one penny


Electric heater A has a power rating of 1kw. Electric heater B has a power rating of 800W. which transfers the most energy in 2 hours?

Electric rating of 1Kw


How would it cost for for a small 1500 watt water heater?

Look on your power company's bill and find out how much you are being charged for a Kwh. It could be anywhere from .04 to maybe even .10 per Kwh. 1500 watts is = to 1.5 Kw. Say its .06/Kwh then 1.5 x .06 = .09 cents. At this price it will cost you .09 cents for every hour you operate the heater.


Where is the Fuse for engine block heater on a ford 350?

there is no fuse for a block heater the block heater is installed in the oil cooler on side of engine a lead goes from heater to plug in at front of engine this heater is plugged into 110 power from house.it is not controlled by anything in the truck if it is not working have the wiring checked and have the heater checked wiring for block heater is sold separate to heater,and costs about 80 bucks,heater cost about 70 bucks


If a water heater that uses 49kw of power and runs for 8 hours what is the total amount of energy used?

Take the kW for one hour and multiply by the hours the unit is on.


What is ten cents a day to the 30th power?

Raising cents to a power doesn't make sense. What would be the meaning of square cents, cubic cents, etc.???


How many watts does a small ceramic heater use?

A ceramic heater uses the same amount as a regular heater. Most heater use 1500 watts so in one hour a 1500 watt home heater will use 12.5 amp hours.


How much does 350 watts cost?

The wattage measures an instantaneous power consumption of a load. You get charged by Watt Hours. A typical cost per 1000 watt hours might be around 12 cents.


What are kilowatt-hours and what is their common use?

A KW is an amount of power and the hour is how long you use it for , 1 kwh from the power company will cost about 20 cents and run about 15 light bulbs for 1 hour


How do you change a block heater in a 1976 Buick LeSabre?

Unplug the power cable by pulling it straight out. Drain the coolant. There is a screw in the block heater. Loosen this screw, probably a Phillips. Put a drain pan under the heater and pull the heater out by hand. If the heater is stubborn. grasp it with pliers and pull hard. If there is collant in the block, it will probably shoot out, so wear glasses and watch out for coolant! Clean the hole with a rag or paper. Press the new heater into the hole by hand making sure the rubber gasket is seated. Tighten the screw in the heater and it will suck the heater into place. Plug in the new power chord that comes with the heater. Refill the radiator with coolant. Test the heater by plugging it into 110 ac. Reach behind the power cable and touch the block heater. It might make a humming sound and should be starting to get warm in a minute or so. Now you are ready for -40 degree temperatures. It takes the heater 3 hours to properly heat the engine block on a very cold day. Unplug the power cable by pulling it straight out. Drain the coolant. There is a screw in the block heater. Loosen this screw, probably a Phillips. Put a drain pan under the heater and pull the heater out by hand. If the heater is stubborn. grasp it with pliers and pull hard. If there is collant in the block, it will probably shoot out, so wear glasses and watch out for coolant! Clean the hole with a rag or paper. Press the new heater into the hole by hand making sure the rubber gasket is seated. Tighten the screw in the heater and it will suck the heater into place. Plug in the new power chord that comes with the heater. Refill the radiator with coolant. Test the heater by plugging it into 110 ac. Reach behind the power cable and touch the block heater. It might make a humming sound and should be starting to get warm in a minute or so. Now you are ready for -40 degree temperatures. It takes the heater 3 hours to properly heat the engine block on a very cold day.


How do you compute electrical consumption of a device?

A simple electrical device is a 60 watt light bulb. The bulb is consuming 60 watts of electricity from the moment you turn it on. If you keep that light bulb on for 10 hours the power used is 60 watts x 10 hours = 600 watts of power. Electricity is sold in Kilowatt Hours. A Kilowatt is 1000 watts of power. Depending on the state you live in, it sells for 7 to 18 cents per Kilowatt Hour. So if you leave that light bulb on 10 hours per day for 30 days you will have used up 600 watts x 30 days = 18,000 watts of electricity = 18 Kilowatt Hours. At an average cost of 10 cents per Kilowatt Hour that bulb costs you $1.80 per month to leave on. The formula is watts x time x cost per Kilowatt Hour = cost of use...Answer provided by Gene Evangelist


How much does 150 watts cost per day?

Power is measures in watt-hours, so 150 watts for 24 hours (one day) would be 3.6 kWh (kilowatt-hours). If your electric rate is, for example, 10 cents per kWh, it would cost you 36 cents per day. In reality, many electric bills have a minimum charge, and include other charges for the service of generating, transmitting and delivering the power, plus taxes. So, for example, running a 150-watt lightbulb for a month should cost $10.80 for a month, but may actually be billed as $17, if there is no other device being used, because of the fixed costs in addition to the variable cost.