Not much work at all, just go to the switch and flip it up. As for how much energy does it take, that is a different matter.
Yes. Simply turn on the ceiling fan while the light switch is in the "on" position. Adjust the spinning to the level of your choice. Now the fan will turn on and off when you switch the light on and off.
Right when you flick the switch to turn on the light the socket connects and the light will automatically turn on.
It can, if the light is a capacitance type of lamp that you touch to switch it on, then a surge can turn it on.
It means 'operate the light-switch so as to cause the light to illuminate'.
It's because they are not wired in a 3-way fashion. The switch downstairs is wired in series with the switch upstairs in the same manner the pullchain on a light socket adapter would turn on and off your light only when the wall's switch is on.
Take the lobster claw and turn the switch.
It should only take one person to switch on a light bulb if it is 6 light bulbs it may take 6 people to switch on a light bulb Der!
The fog light switch is on the end of the turn signal switch. Just pull the end of the turn signal switch and the fog lights will come on. (Turn signal switch and fog light switch are one assembly)
When you turn on a light switch you do not have an open circuit.
the turn signal switch is located inside the steering wheel colum. you have to take it apart using a lockplate remover. the brake light switch is located just above the brake pedal
The light switch is right above the doorbell. You have to open the door to turn it on. It might take a little jiggling for the light to come on.
well most people say turn off the light but you could say switch of the light.
Turn the first light switch on and wait 5 minutes, turn it off. Turn the second light switch on and go into the other room. The light bulb that is currently "on" represents the second light switch. Touch the next two light bulbs and which ever is hotter represents the first light switch. You can find the third by cancelling out the other two.
I just changed mine. Pull gently down and snap off on the plastic globe. Take old fuse out and put in new fuse. Replace (snap on) the plastic globe. Turn overhead light switch toward driver side to turn off dome light. Turn overhead light switch toward engine to automatically turn light on when doors are opened. Turn overhead light switch to right passenger side to turn light on with doors closed (or open).
Yes. Your broken light switch is probably the culprit.
turn head light switch till it clicks and theses your dome light switch...
Mythbusters actually proved that flicking the light switch on and off didn't cost any more than 2 cents.