The labor require to install a fuse box on your 2000 Mercury Sable is approximately 2 hours. Most shop charge between $60 and $80 per hour. The installation cost is between $120 and $160.
mercury sable
The 2000 Mercury Sable starter can be found on the right hand side of the engine. The starter will be near the back of the engine.
On a 2000 Mercury Sable : The automatic transaxle ( transmission ) fluid level dipstick would be near the firewall just to the drivers side of the engine ( where the transaxle is bolted to the engine )
on the steer wheel
The 2000 Mercury Sable starter will have three retaining bolts. There will be two cable retaining nuts on the front of the starter.
On a 2000 Mercury sable : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
torque specs 2000 mercury sable 3.0 12V rod bolts
In a 2000 Mercury Sable : The thread on cap on the engine coolant reservoir is the pressure cap / radiator cap
There is a thermostat on all cars.
no it will not
firewall 1-----2-----3 4-----5-----6 front of Mercury Sable > driver
According to the 2000 Mercury Sable Owner Guide : Motorcraft MERCON automatic transmission fluid is used as the power steering fluid