Want this question answered?
Front seal: remove engine or transmission and replace the seal. Rear seal, remove the drive shaft to replace the seal. Unfortunately, you typically only have problems with the front seal.
drop transmission remove old seal replace with new seal
remove transmission, remove rear main seal, install new rear main seal, install transmission.
You must remove the transmission are engine to replace the rear main seal.
You will have to remove the transmission and torque converter from the car to get to the front seal.
remove the trans. and get a seal puller
Remove transmission and replace front seal.
under the bottom of the transmission remove the pan.
You have to remove the transmission from the vehicle, then remove the flexplate from the crankshaft. The seal is directly behind the flexplate.
Remove the tire and wheel. Remove the axle end cap. Remove the axle seal with a seal puller. Reverse the process to install the new axle seal.
You will have to remove the transmission and pull the toqure converter out of the front of the trans. then you will see a seal in the center of the trans. Remove it with a screw driver, then clean and install new seal it will drive in with a hammer if your good. You may need a seal driver.
yes , because the seal is behind the torque converter