It is really very simple. With the car on jacks, I assume you mean the front trans mount, it is round, so is the rear mount, support the engine and just start taking the bolts out that connect the mount. If you have air tools, this will help you with the job, but you can do it without. Once you have the mount in your hand, then just replace it with the new one, only fits one way, then tuck the mount back into place, and bolt to the frame and trans.
If you are speaking of the front mount, it is a transmission mount, and you must lower the subframe to R&R.
take it to a dealer
replace calipers in pairs. replace brake hoses at the same time.
First what is wrong with you headlight switch on your 93 topaz.
YES.
The 1993 Mercury manual transmission linkage will have adjustment nuts on each end of the linkage. Turning the adjustment nuts will move the linkage back in forth.
Have to drop the oil pan, have to remove a lot of parts in the way.Can do it from underneath, you do not have to take the engine out.........
A motor mount for a 93 Escort with an automatic transmission sells for aprox $25.
is there a way to fix or replace just the rubber in the mount
call the Ford dealer or a salvage yard near you. Looks good but might be a model year change there.
the answer is yes the block sizes and transmission but your going to have to make only two new holes for the transmission mount.
No, the only transmission that fits exactly is a 94-97 Accord. The 90-93 Accord can be used, but you will need the 90-93 flywheel. Chuck