The process to replacing the window regulator involves removing the door panel,connections to the window switch and also the door handle bezels.
I've included a video that will show you exactly what tools you need and how to get at the window regulator so that it can be replaced.
Window regulator controls the up and down motions of your car window. Both electric and manual windows have a window regulator. Not the easiest part to replace, but once you dissembled the door panel it should be fairly simple to replace.
HOW DO I REPLACE WINDOW REGULATOR MOTOR ON PASSENGER SIDE WINDOW
The panel where the regulator is detachable. You will be able to remove it very easily. When you remove the panel you will see the way how the regulator can be replaced.
Begin by removing the inside door panel. Remove the wiring harness from the electric window regulator. Remove the window regulator retaining screws.
if manual, window regulator. if electric, check fuses, window switch, window motor, window regulator.
Here's how to test and repair power windowshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
how do I replace the passenger side window regulator on an E250, 2006. the window will not release to push to top of window frame only half way?
How do you install a 1994 Chevy blazer electric window? In:http://wiki.answers.com/Q/FAQ/603[Edit categories]
replace the window regulator.
To replace your window, you need to have the window rolled up. On the regulator(that is the little arm that connects to the metal peice on the bottom of the window) is 11mm bolts. If you take those four bolts out, the metal sleeve on the bottom will come off. Clean out the old silicon. Put in new. Replace bolts.
To replace a rear window regulator on 2005 CTS Cadillac remove the side protection panel of the car door then adjust the regulator.
It is easy to replace the window regulator or window clips on the rear window of a 2000 Grand Am. The clips simply snap right onto the rails inside that door that connect to the window.