It is easy to replace the window regulator or window clips on the rear window of a 2000 Grand Am. The clips simply snap right onto the rails inside that door that connect to the window.
you will have to replace the window regulator.
The window sash clips connect the door glass to the regulator. The part # for the 2000-2004 is 22689012. Once the glass is out You can heat and remove the old sash and epoxy the new ones in place!
To replace a window regulator on a Renault Grand Scenic, start by removing the door panel. This usually involves unscrewing any visible screws and carefully prying off clips. Once the panel is off, disconnect the electrical connectors and remove the old regulator by unscrewing it from the door frame. Install the new regulator by reversing the process, ensuring all connections are secure before reattaching the door panel.
You will have to replace the regulator assembly.
how do you replace the drivers window clips on the glass od a 1995 grand prix se 2 door?
The plastic clips on you window regulator have broken. You need to replace the whole thing if those clips have broken. Take the door pannel off and see if there are plastic peices in the bottom of the door.
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
Which regulator and what year? You have a window regulator, voltage regulator, fuel pressure regulator to name a few.
To remove the rear driver side window on a 1999 Grand Prix GT, first, you need to remove the door panel by unscrewing any visible screws and carefully prying off the panel clips. Once the panel is off, disconnect the window regulator and motor wiring harness. Next, carefully detach the window from the regulator by removing any clips or bolts securing it. Finally, lift the window out of the door frame and set it aside.
Trade it in for a Holden
Try this link, http://www.a1electric.com/grandam.htm. It shows how to replace the entire window regulator assembly (which includes the motor). Probably the cleanest description I have found.
change the window regulator