What is hard? Take off the wheel, remove the Allen bolts holding the caliper and proceed like any other car. I think the trouble is that people see the round headed bolts that mount the caliper and think they are part of the stub axle assembly. They assume that they cannot be removed . They are Allen bolts or hexagonal drive bolts, they are rotated via an inset hexagonal recess on the top of the bolt.
They are actually torx bolts and not allen keys.
To change rear disc brake pad on a 2004 hydunai Santa Fe, find replacement disc brake pads, and then locate the user manual of your vehicle. Follow the instructions on the manual.
You should inspect the pads and rotors at least twicw a year and change pads if they are worn down to 2mm.
how to change rear brake pads to Nissan maxima 96
how much to get brake pads and rotors replaced on a holden vt commodore
To change the disc brake pads on a 2003 F250 you will first need to remove the wheel and tire. There are 2 caliper bolts behind the caliper which need to be removed. Then use a special tool or C-Clamp to push in the caliper pistons and replace the disc brake pads.
how to replace front disc pads on 1983 300d Mercedes Benz
The same as any other vehicle.
Shimano BO1S Resin pads
Remove tires unbolt caliper remove old pads compress piston back into caliper put new pads on put caliper back on put wheels back on
Pads: Similar to front disk pads, except that the caliper piston is retracted by turning clockwise, not pushed directly in.
hi there, you take the wheel off, unbolt the caliper off, so it comes away from the disc, pop out pads and replace pads,
I am changing rear disc brake pads on a 2004 Chevrolet Malibu lt can I get step by step instructions to make it easier for me.