answersLogoWhite

0


Best Answer

This is a 15 minute job... use a 15MM socket and ratchet (set to loosen) to move the tension pulley (located directly below the oil dipstick) toward the battery side of the engine compartment. this will allow enough slack in the old belt to pull it off of the alternator. It will then come off everything else. Keep track of the routing for the new belt, or refer to the sticker over the radiator, for reinstallation. Use the 15MM socket and rachet to move the tension pulley in again to reinstall the new belt. Have Fun!! These used to be a pain in the a**!!!!

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How to change the belt on a 1999 Dodge Durango?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What would cause a loose drivebelt on your 1999 Dodge Durango?

A weak tensiometer for the suppertime belt, or an worn - over stretched belt. Change belt or tentiometer.


How do you install a timing belt on 1999 Dodge Durango 5.2?

there is no timing belt on a 318cu it has gears and a chain for timimg


How much does a serpentine belt replacement cost on a 2000 Dodge Caravan cost?

Not sure ,but it costs $115 to change mine on my 1998 Dodge Durango.


Does your 98 dodge durango have a timing chain or belt?

Chain


Does the 2003 Dodge Durango have a timing belt or a chain?

Chain.


Do the timing belt have to be replaced when replacing the water pump on 2000 durango v8 5.9l?

A Dodge Durango does not have a timing belt. It has timing chain. If the timing cover chain gasket is leaking it is normal to change it while changing the water pump.


Where is the belt tensioner for a serpentine belt on a 1999 Durango?

It is located right under the alternator.


How do you replace the fan belt on a 1999 Dodge Durango?

take 15 mm wrench and pull the belt tensioner toward the left it will loose the belt.TO install start to put the belt on from the crank and make ou way up.


How do you fix a stuck seat belt in a 2000 dodge durango?

To fix a stuck seat belt on a 2000 Dodge Durango, pull on it to release its auto lock function. Pry off the plastic cover that hold the seat belt mechanism with the use of a screwdriver, loosen the stuck belt, and put back in place. ?æ


How do you loosen the belt tensioner on a 1999 Dodge Durango?

place a wrench on the bolt in the center of the tensioner and push if you feel nothing push the other way and you will see that the whole assy is spring loaded and will move to release tension on the belt


How do you change a timing belt on a 1999 Plymouth Breeze belt was broken?

How do you change a timing belt on a 1999 Plymouth Breeze belt was broken?


Belt squeal 2003 dodge caravan?

Change the belt