Remove the intake manifold retaining bolts on your 2003 Chevrolet Malibu. The manifold will come off. Remove the manifold gasket and clean the surface. Put the new manifold gasket on and reverse the process.
Remove the exhaust pipe from the exhaust manifold. Remove the manifold bolts. Remove the manifold. Remove the manifold gasket and clean the surface. Reverse the process to install the new manifold gasket.
Remove the valve cover retaining bolts. Remove the valve cover gasket and clean the gasket surface. Put the new valve cover gasket on and return the valve cover to its original position.
you can go to any auto parts store and get a Hayes repair manual this will tell you how to fix your problems. Hope that will help with your intake gasket problems
jaguar 2001 Lower Engine Intake Manifold Gasket
if its a v6 and you take your time. it takes about 6-8 hours, depending on how fast you work !
Pretty straight forward. You must remove the intake manifold in order to replace the gasket.
It is between $65-$85 for the gaskets.
What engine? and ensure it is a bad gasket, not an intake plentum.
if its a 3.1, the possibility is the intake manifold gasket!!
there is no upper intake gasket, only a front and rear
Intake manifold gasket
The head gasket on a 1999 Chevy Malibu is replaced by removing the coolant, intake manifold, and retaining bolts. The cylinder head can then be removed, the gasket replaced, and everything reassembled.
www.trailvoy.com
Yes, you must install a new intake manifold gasket.
Irratic idling condition is indication of intake/inlet manifold gasket leak. Change gasket immediately. This particularly applies to EFI engines. Newaz.