Want this question answered?
To change the shift linkage in an 1998 automatic Chevy Cavalier the shift linkage needs to be removed from the transmission and pulled from the cabin. The job requires removing the floor console to access the cable. After doing the so the cable can be snaked from inside the cabin, the install is the reverse of the removal.
The 1989 Acura Legend transmission shift cable is held in place with swivel nuts. Loosen the swivel nuts on each end of the cable. The transmission shift cable will come out.
The transmission uses a cable for linkage. If the car has consol shift the cable runs from the shifter to the transaxle. If it is a column shift the cable runs from a lever on the column to the transaxle.
The shift linkage on your Chevrolet Blazer automatic transmission will go from the shifting handle to the right hand side of the transmission. The shifting linkage is actually a shifting cable.
They don't use linkage, they use a cable. The cable goes between the shift lever mechanism to the transmission.
yes
It is the part that connects the handle the driver moves with the linkage on/inside the transmission.
If you are no longer able to shift, then it's possible the linkage is broken. If this is a periodic problem, you may need to adjust the linkage or shift cable so that everything is prooerly lined up
The cable/linkage between the shift lever and transmission is likely broken or disconnected
shifter control cable is probably come off @ linkage
Bent or binding shift linkage Try lubricating shift linkage and/or cable
If your Blazer won't go into park the problem could be with the shift linkage. There could be a problem with the cable, but the shift linkage is most likely responsible.