Want this question answered?
also need code to turn Phillips vcr on and off. or maybe get codes for a russound universal remote to turn on/off Phillips vcr and vizio television. thanks
This unit is basically the same as the D770 universal remote. You can download instructions from RCA at RCA.COM. The Only difference is there is no light below the ON/OFF button, the individual buttons will light, and when you hold down the device key and the on/off together all lights will come on.
If an RCA Universal Remote's on-off light will not turn off and the remote is frozen, take the batteries out for a while. Then, put the batteries back in and try it. If it is still frozen, a new one might have to be purchased.
To program a Symphonic TV with an RCA RCR-612 universal remote, there are four codes which you can try. Those codes are 1033, 1038, 1046, and 1047. To try the codes, press and hold the TV button on the universal remote. After you enter the fourth digit, the power light will turn on. Once the light is on, release the TV key. If the power light turns off, you have the correct code and can now use the remote. If the light blinks, it isn't the right code and you need to repeat the procedure until you find the right code for your particular TV.
Sky is a brand that has made TV boxes and even broadband boxes. The Sky remote makes use of a "code" to operate the Sky box and the operator's TV, meaning that the operator only needs one remote to handle all Sky functions, including turning the TV on and off.
Here are some codes I found online but none seem to work for my remote. Codes for Magnavox TV when using RCA Universal Remote: 006,007,010,011,013,016,027,033,035,043,066,087,089
Use 0056, same as LG. Worked for me with a 32" LCD HCT TV Use 19 for TV power on/ off with other vendor's programmable remote.
Universal remotes need to be programmed to the T.V. in order for the remote to work on the T.V.
To program the remote with the codes, firstly, turn on the electronic gadget for which you are going to use this remote, by pressing the On and Off button. Then locate the Setup or the Code Search key on the remote control. These buttons may vary from remote to remote. Just hold on the setup or the code search key for 5 - 10 seconds or till the light on the remote
download the codes and the manual for free here http://www.replacementremotes.com/store/productdetailp.cfm?productid=61355 Go to: http://www.lexrixa.com/remote-control.htm This List the codes and the Manual at no charge.
In programming a ds converter using an RCA universal remote, it is necessary to find the code for the remote. This can be done by turning devices on and pressing search. It will rotate through and stop when the successful setting has been reached. Switch to each additional device that needs to be connected on the remote and perform the same function. This will program all devices to work off the universal remote.
If you have direct tv, you can just go to the menu and look for the code for the specific TV. And if you find the code, you have to know how to program that certain remote control. And if not just go to a Electronics store and buy a ten dollar remote and get the codes off of the instructions. They should definitely have the codes.