0
I have a 1999 Accord and have replaced the front and rear stabilizer bar links on the driver's side. Theoretically, you can put a size 5 metric hex key in the end of the bolt to keep it from turning while you loosen the nut with a 14mm wrench. However, rust and age usually make the hex key nut useless.
I found the easiest thing to do was to destroy the link while it was still on the car so that I could grab the ball joint with a vise grip to keep the bolt from turning. Remember to put WD-40 and use a small cheater bar (maybe 1 foot long) for extra torque. You will also need to jack up the suspension to take the weight off of the link when you remove and install the new one.
-Mike F.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you remove the stock CD player from a 2000 Honda Accord?
Follow the instruction in the link to remove the plastic cover http://www.installdr.com/InstallDocs/Honda/PDF/466053.pdf
What type engine is in a 1998 to 2000 Honda accord?
Click the link.
How do you change a stabilizer bar on a 2000 Malibu?
1 Remove wheel, tie rod ends, nuts from link bolts. 2 Remove stabilizer bar bushings 3. unbolt rear engine mount bracket from sub-frame 4 remove sub-frame (6) bolts 5 Drop sub-frame 3 inches onto jack stands. 6 remove stabilizer bar and bushings through wheel well. 7. have 1 beer only install new stabilizer in reverse order IMPORTANT to observe factory torque specifications
Where is Diagnostic link connector in 97 Honda accord?
The diagnostic link is behind the ashtray,which you will have to remove to get to the connector.
How do you decode Honda accord 2000 radio?
I do not know what you mean by decode. If you are wanting to know what the code is for your 2000 Accord it is easy to find out. Just go register your Honda at the Honda Owners Link I will provide. Once you register the car you can get the radio code there for free by simply asking. Click the link and sign up.
How do you remove the cassette radio from a Honda Accord 1992 J reg?
Go to this link http://wiki.answers.com/Q/How_do_you_remove_the_radio_to_install_a_new_CD_player_in_a_1992_Honda_Accord
How do you remove the rear bumper on a 2002 Honda Accord?
There is a site that shows how to remove the rear bumper in an Accord but it is NOT the 2002 but the 2003 model. I don't know how much different this would be but it might give soe insight. The link is www.cardomain.com/ride/650229/3
What is a fuse fusible link for 1983 Honda Accord?
what is a fuse fusible link for 1983 Honda accord
What is the name of the part at the end of the stabilizing bar?
link pins. bushings and links Stabilizer link bushings.
How do you replace sway bar link of a 2001 expedition?
Do you mean Stabilizer Bar?
How do you remove a radio on a 2000 grand prix gt?
Follow the link below. This is how I removed the stereo on my 2000 grand prix gt
How do you install Stabilizer links on a 2000 ford explorer 4x4?
If its the front link 3 piece desing, just pry up on the swaybar, insert the center section and run the long bolt through it.
