The Electric Fuel Pump assembly is located inside the fuel tank. Electric Fuel Pump Removal & Installation 1. Disconnect the negative battery cable. 2. Relieve the fuel pressure. 3. Raise and support the vehicle. 4. Remove the fuel tank; refer to the procedure outline in this section. 5. Remove the fuel pump retaining bolts. 6. Remove the fuel pump. To Install: 7. Thoroughly clean the fuel pump-mounting flange. 8. Install a new gasket and place the pump into the tank. 9. Ensure that the fuel tubes face toward the fuel rail and tighten the retaining bolts to 80-107 inch lbs. (9-12 Nm). 10. Install the tank as outlined in this section. 11. Tighten the fuel tank bolts to 66-91 inch lbs. (7.6-10.4 Nm). 12. Tighten the fuel tank straps bolts to 22-30 ft. lbs. (29.7-40.7 Nm). 13. Tighten the skid plate bolts to 9.3-12.7 ft. lbs. (12.7-17.3 Nm). Connect the negative battery
The electric fuel pump is INSIDE the fuel tank on a 2003 Ford Expedition
not so much an answr but direction. I believe it is the same as the 2003 so look at the answer for the 2003 expedition.
My 2003 Ford Expedition is not gas to fuel rail i dont know what to do
The 2003 Ford Expedition runs on regular unleaded.
On a 2003 Ford Expedition : 106 liters ( 28 U.S. gallons )
2003 relay fuel?
According to the 2003 Ford Expedition Owner Guide : ( 106 liters / 28.0 U.S. gallons )
fuel pump is inside gas tank
The electric fuel pump is INSIDE the fuel tank
The electric fuel pump is inside the fuel tank
The electric fuel pump is inside the fuel tank
my 2003 Ford Expedition seem to have a fuel or relay malfunction. I can get the truck to crank if the doors are locked and unlocked several times, but it still will not start at all.