0
How to replace door latch spring in sharp microwave model R-1610?
Wiki User
∙ 14y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you replace the slide release latch spring on a savage model 30 shotgun?
Best left to a gunsmith.
How is a magnet useful to a microwave?
to help latch the door closed
How do you fix the hood latch of a Toyota Rav 4?
remove the three bolts (10mm) disconnect the ball end cable and replace with new latch unit. or if a spring is broken, go to a local hardware store and find the best match and replace the spring. spray the whole thing down with pb blaster lube while it's off. hope this helps.
How do you replace tail gate latch for a 2001 ford 150?
How do you replace the tail gate latch on a Ford f150
How do you replace a door latch on an LG refrigerator?
What is a door latch mhahahaha lol Joking! Answer: Replace it with duct tape
How do you get to the hood latch on a 99 Honda Civic to repair or replace it if it is not catching?
my hood latch did the same thing, and i found the only way to make it catch is by manually pushing the hood release button BACK IN before closing the hood and then it seems to work fine If you have to manually push the release back in to operate the mechanism, you have one of two problems. The spring on the hood latch is broken or the hood latch or release cable is corroded and sticky. Locate the hood latch near the radiator and spray it liberally with a penetrating lubricant, visually check to see if the return spring is broken. If the spring is good and the lubricant doesn't fix the problem you will need to replace the cable, which looks much like the brake cables on a bicycle.
Your interior door latch on your 1997 Chevy silverado is not releasing the latch How do you fix?
Replace the door latch.
If the drivers door on a 1989 Accord will not open but everything appears to be connected how can you get the door open to replace the latch?
I have dealt with this problem before at our bodyshop. Basically, a spring inside the latch has broke, and now there is no way to release the latch, even by manually pulling on the release lever at the latch. Prepare to replace the latch, as it is not repairable. Be prepared to be working inside the car. To make it easier to work, unbolt the seat, and remove from the car. Remove the door panel, and also the door handle. You will have to chisel at the plastic part of the latch, and break it off bit by bit. Eventually you will be able to release the latch. good luck
How do you get the lock cylinder off the trunk latch to replace latch?
With a Large Hammer
How do you replace a hood latch on a 1995 F150?
To replace a hood latch on a 1995 F-150, the old hood latch will have to be cut out with a blow torch. The new hood latch will have to be welded in place. Securing with bolts after welding will make the hood latch stronger than that of the original.
How do you open a hood when the latch breaks?
Use pliers to pull cord or replace latch.
Where can I find a replacement push button spring loaded latch for a bird cage?
Ebay.Search for push button latch
