http://d-tips.com/General/Articles/article.aspx?id=/free/How%20to/GM%204.3L%20Intake%20Manifold%20repair/43intakearticle.art
The labor charge to replace and intake manifold gasket, on a 1999 Chevrolet Tahoe, is approximately $180. It takes approximately 2 1/2 hours to replace the gasket.
Remove the manifold and change the gasket. And voila!!!
No. which manifold gasket are you wanting to replace? Intake or exhaust?
Replace gasket why does gasket keep sliding
I found an independant mechanic, who works out of his own building on a farm, who does this for about $375
Head gaskets are changed on a 97 Chevy Blazer by removing all engine accessories, taking off the intake manifold, removing the valve covers, and taking out the retaining bolts. The heads can then be lifted, the gasket removed, and a new gasket put in place.
Yes, you must install a new intake manifold gasket.
The gasket is between the head and the manifold and simply remove the bolts and replace the gasket after cleaning it real good.
no
You have to replace the gasket because when you take the manifold off it brakes the seel and air will be sucked into the manifold and your vehicle will hardly run, and you wont be able to drive it You have to replace the gasket because when you take the manifold off it brakes the seel and air will be sucked into the manifold and your vehicle will hardly run, and you wont be able to drive it
i have the haynes book from auto zone for mine, it has step by step instructions for taking off your intake manifold. i know cause im pretty sure my gasket just blew saturday.....so i been researching it also
It is between the upper and lower intake manifold. The gasket is an o-ring type.