To replace the door lock sensor you have to replace the door lock unit. You have to remove the door inside trim panel. To remove this trim panel carefully prise the top of the inside door handle ( use a plastic priser, a metal screwdriver may csratch). Remove torque screw inside handle. Next there is a plastic sign on the door trim panel that says "SRS air bag" Using your plastic priser prise it from the bottom. It should open like a trap door, inside there is another torque screw remove it. Carefully prise the trim panel from the door it is held on with plastic push on holders and a waterproof sealant. You should now be able to see the door lock Remove the door lock screws and unclip wires. To extract the lock from the door you have to remove the two revits holding the window sliding bar Carefully sneek the lock down and out through the opening at the bottom of the door. Reverse the process for fitting.
How do I Replace the door mirror on a mercedes benz 1994 c-class
No.
Yes
door mech fix c180
To replace a Mercedes outside door handle, first the door grommets from the inside of the door panel must be removed. Then, inserting and turning the key allows the handle assembly to be pulled out and replaced.
a crowbar will usually do it
unplug it
Replacing door actuator on ml500. How do I remove the outside door handle?
Because he is samir
I am having an issue with my drivers side door sensor. I have yet to do anything with it, but from what I know about VWs (i have owned and worked on them for 12 years) the door sensor is located in the door latch. I am currently looking into whether I can replace just the sensor or if i have to replace the whole latch...I read that the latch costs about 150.00. to install it, you would have to remove the door panel which can be tricky.
Spray oil on it through the door and it will stop.
It should take you less than a half an hour to replace the TPS sensor.