0
What else can I help you with?
How do you reset service indicator for 2010 ML550?
reset service light on 2010 ml 550
How do you reset maintenance light on Toyota Corolla 2010?
How do you reset maint read light on 2010 corolla
How do you reset service light on 2010 Honda Accord?
Turn the ignition switch to the ON (II) position.Press the select/reset knob repeatedly until the engine oil life indicator is displayed.Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to "100."NOTE: After the engine oil life and maintenance item codes start to flash (blink) you must RELEASE the reset knob and press again for another 5 seconds. It will then reset.
How do you reset oil maintenance on 2010 Lexus gx 460?
How to reset oil maintanance on a lexus gx 460
How do you reset low brake pad indicator on 2010 ford transit?
To reset the low brake pad indicator on 2010 Ford Trans IT simply turn on the ignition and press the foot brake and the accelerator simultaneously. The accelerator and the foot brake should be pressed at the same time.
How do you Reset a 2010 Mazda 6 maintenance light?
To reset the maintenance light on a 2010 Mazda 6, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then start the engine to ensure the maintenance light is reset. If the light remains on, repeat the process.
How do you reset the maintenance required light on a 2010 Scion XD?
You will find that info in the owners manual.
How do you reset service codes for 2013 Mercedes Benz c250?
Service wrench on 2010 c 250
How do you reset code 82 service inspection light on vauxhall meriva 2010?
Just press the trip reset button
How do you reset service light 2010 Audi a4?
I Think its a main dealer job only as they use a guided function with the Audi VAS computer to reset the service display
2010 Dodge Grand Caravan how to reset oil light?
From page 232 of the owner's manual: (go to dodge.com to download)To reset the oil change indicator system (afterperforming the scheduled maintenance), refer to thefollowing procedure:1. Turn the ignition switch to the ON position (Do notstart the engine).2. Fully depress the accelerator pedal slowly three timeswithin 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.NOTE: If the indicator message illuminates when youstart the vehicle, the oil change indicator system did notreset. If necessary repeat this procedure.
How do you reset the low tire pressure indicator lighton a 2010 Jeep Patriot?
To reset the low tire pressure indicator light on a 2010 Jeep Patriot, first ensure that all tires are properly inflated to the recommended pressure. Then, turn the ignition to the "On" position without starting the engine. Press the gas pedal three times within ten seconds, then turn the ignition off. Start the engine, and the light should be reset.
