To the right of the clock face should be two buttons, one labeled H and one labeled M. Use a pen to push the H button for the hour and the M button for the minute.
S
Use the set buttons.
My 2000 Dodge Durango , my clock does not have the h or the m for setting the clock! any suggestions on how to set the clock????? Turn radio on, press set, press sel, now seek should change time.
You can set the clock, on your 2005 Dodge ram, by holding in the volume button. Turning the tuning knob as the volume button is held in. The time will advance with the tuning knob.
look in your owners manual.
Turn the radio on, press "set" button, then press the volume button which should bring up the hours. Change the hours by turning the tuning dial. Press the volume button again, to change to the minutes. Change the minutes by turning the turning dial. When done, press the volume button again. Clock should be set. This works for the 1988 Dodge 600, too.
The clock on the radio can be set by two buttons found to the right on the display screen. H for hour and M for minute.
Push the set button and within 10 seconds press the seek and scan buttons.
Start engine, unplug coolant sensor, set to 12 btdc
The timing on a 1989 Dodge truck should be set to 10* after unplugging the temperature sensor.
Press the set buttons for hour and minute.
1988 Dodge Caravan Clock manual Turn the car key to ACC. Turn the car stereo ON. Press the SET button, until the time appears. Push the VOLUME button. Either a P or an A will appear. Press the SET button again. Push the VOLUME button. You can change the Hour now. Rotate the TUNER button, left or right until you reach the desired Hour. Press the SET button again. You can change the Minute now. Rotate the TUNER button, left or right until you reach the desired Minute. Press SET again. Now turn the stereo OFF. Compiled by: Shawn Marzette‎Sunday, ‎29 ‎September, ‎2013