not sure about the first gen but my second gen an 01 is always on
How to replace fog light bulb for acura rl 2002
This connector is directly connected to the( fog light switch) or Plastic Cover next to the shifter (Passenger side). the driver side on the top right of the firewall if your looking at the engine bay,"in frustration." It is taped to the throng of wires coming out on that side. The throng of wires are coming out of the firewall from the fuse plate that sits under the driver side knock-out plate by the brake pedal. This connector is directly connected to the fog light switch next to the shifter. It will only turn the fogs lights on, in order to get power you can find the other harness or plug directly into the battery like I did. I finally have fog lights, posting a picture now. If you have a 97 acura cl 3.0 remember that the 03 Honda Pilot fog lights will work with out cars. The only thing you need is the plate that screws onto the back of the fog light so that you can then mount to the bumper of our cars. PM me with any ?'s and 97BlackackCL and bRunCL i appreciate you guys continuously replying to my fog light posts.
Acura CL was created in 1997.
Before replacing the headlight bulbs on a 1997 Acura CL prop the hood open. Locate the headlight housing and remove the old bulbs. Install the new lights.
how to change alternator in acura 1999 cl
where"s the solenoid for a acura cl 2001
To replace the rear corner lights on a 1998 Acura CL open the trunk. Find the brake light housing and disconnect the bulb. Install the new bulb.
Coupe luxury
A 1997 Acura CL in good condition sells for approximately $2,000.
yu have to put a key in the ignition, and turn it.
To replace the bulbs in a 1997 Acura safely prop the hood open. Locate the front headlights and remove the old lights. Replace the bulbs.
how do you add transmission fluid on 98 acura cl 3.0