If you think to a 2 M solution dissolve 80 g NaOH in 1 L demineralized water at 20 0C.
Yes, you can make a 1N NaOH solution from a 0.1N NaOH solution by diluting it 10 times. For example, to make 1 liter of 1N NaOH solution, you would mix 100 ml of the 0.1N NaOH solution with 900 ml of water.
First you must either know how much 50% NaOH you want to start with or know how much 2% NaOH you need at the end. Let's say you want 1L of the 2% NaOH. Use this equation, and solve for x, where in this case, x is the volume of 50% NaOH needed. (50% NaOH)x = (2%) * 1000 ml 0.5x = 0.02(1000) x = 20/0.5 = 40 Therefore, 40 ml of 50% NaOH in 960 ml water will produce 2% NaOH. Use a 1000 ml volumetric flask to be most precise.
To prepare a 0.1N solution of NaOH, dissolve 4g of NaOH pellets in enough distilled water to make 1 liter of solution. This will result in a solution with a concentration of 0.1N of NaOH.
To make a 0.1M solution of NaOH, dissolve the appropriate amount of NaOH pellets in water to make a solution of the desired volume. For example, to make 1 liter of 0.1M NaOH solution, dissolve 4g of NaOH pellets in enough water to make 1 liter of solution. Remember to wear appropriate safety gear and handle NaOH with care due to its caustic nature.
You would need to add 18.75g of solid NaOH to the 750g of aqueous solution to obtain a 2.5% NaOH solution by mass.
To make a 2N NaOH solution, you need to dissolve 80g of NaOH pellets (sodium hydroxide) in enough water to make 1 liter of solution. This will yield a solution with a concentration of 2N (normality), as the equivalent weight of NaOH is 40 g/mol. Be sure to wear appropriate protective gear and handle NaOH with care, as it is a caustic and potentially hazardous chemical.
To make a 12N NaOH solution, you need to dissolve 480 grams of NaOH solid in enough water to make 1 liter of solution. Make sure to wear appropriate protective gear and handle the concentrated solution with care as NaOH is a strong base that can cause burns.
Need moles sodium hydroxide first.80 grams NaOH (1 mole NaOH/39.998 grams) = 2.000 moles NaOHMolarity = moles of solute/Liters of solutionMolality = 2.000 moles NaOH/1 liter= 2 M NaOH solution===============
75gm
To prepare a 1N NaOH solution, you would need to dissolve 40 grams of NaOH in water to make 1 liter of solution. This amount is used because 1N solution means 1 mole of NaOH per liter of solution, and the molar mass of NaOH is 40 g/mol, so 40 grams of NaOH is needed to have 1 mole in 1 liter of solution.
To make a 10% NaOH solution, you would need 100 grams of NaOH per liter of water. So to make 1 liter, you would need 100 grams of NaOH.
To prepare a 2N solution of NaOH in 10 ml of water, you would need to calculate the amount of NaOH needed based on its molecular weight. Once you have determined the amount needed, dissolve it in 10 ml of water to make the solution. Remember to handle NaOH with caution as it is corrosive.