0
UPS power is not specified in watts.
However VA is the equivalent of watts, assuming no phaseshift in the load.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How you find ups watts?
It is expressed in Volt-Amperes not Watts.
Where can one find information for track ups?
It is believed that this question is referring to the tracking of UPS parcels. One can find information about tracking UPS parcels on the UPS website. There is a wealth of information on the site including tracking detail help.
How many watts do a 850 VA ups use?
maximum power out put is 500 watts
Two measurements are used to rate the capacity of a UPS?
ohms and watts
What two measurements are use to rate the capacity of ups?
VA and Watts
What to do when a horse is pregnant?
Routine check-ups, and the vet will give you specific dates for shots to prevent aborting and worming medicine and supplements. The vet can give you more detail, but that is what you do when your horse is pregnant: check-ups and shots and you may alter their diet with special pregnant mare feed/supplements.
What size of a ups would you need to handle 20 watts?
UPS batteries are typically rated at how many ampere hrs they can supply. IF your 20 Watt device is supplied by 120V then it draws 1/6 amps. (Watts = Amps * Volts for a resistive load). If your UPS were rated for 1 A Hr you could power your device for 6 hours.
How may watt does a load of 3570 watt draw from an UPS of 2010 watt?
If the load wattage is 3570 watts then that is what the load wattage draws. Now by using the expression "draws" maybe you meant to say amps. If it is amperage that you are looking for then the answer can not be given without knowing what the voltage of the system the UPS is tied into.The equation to use is A = Watts/Volts.If a UPS nameplate output rating is 2010 watts then that is the maximum that the UPS is designed for by the manufacturer. Applying a greater load that what the UPS is rated for will void the warranty. Match the load wattage to the UPS's output when calculating what size is needed to operate correctly. This can be done by adding up all of the device wattages that will be connected to it. If the device does not have a wattage shown use the equation above to find the wattage.
What battery back up is recommened to use in sump pump?
My neighbor is running two UPS (Uninterrupted power supplies) computer back-up power supplies. One is 865watts, one is 600 watts. She plugs the sump into a UPS and plugs that UPS into the other UPS. She said one 865 watts isn't enough. They burn-out too fast. The other 600 watts allows it to run 2-3 days (as needed) during a power outage. I don't know how big her sump is. Could make a big difference if its 1/2 or 1/3 hp. I bought 1200 watts in one UPS. It arrives this week. I hope its enough power. I run a 6500 watt Briggs/Stratton generator to power the house and recharge the UPS when the sun rises. 'Cause otherwise, its too loud and wakes the neighbors!
What kva generator to run 15Hp motor?
1HP = 746 watts 15 HP = 11190 watts = 11.19 kW You would need a generator of at least 13kW. UPS Distributor for 15 Years.
Can you give me three examples of anerobic activities?
Push- ups, Sit-ups, Shuttle run
Do pull ups diapers give you a rash?
they give my kid a rash
