answersLogoWhite

0


Best Answer

the cheapest quick fix that works often is a can of engine flush before changing your oil and filter,pour in engine flush let car run 5 to 10 minutes with engine at idle then shut off engine and change oil you should hear lifter getting better during this process.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: I have a 1995 Buick Skylark with a 3.1. Any cure for a stuck valve lifter or is replacing them the only answer?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Will thicker oil stop lifter sounds?

Sometimes depending on why lifters are noisy. If there is a piece of dirt stuck in one or it's damaged it needs replacing


How do you fix a stuck lifter on a Chevy 305?

If a lifter is stuck in the lifter bore and won't move, it has probably ruined the cam. The procedure would be to install a new cam and lifters.


What might cause the motor to tap?

A stuck lifter or loose connecting rod.


What could cause a loud tapping noise in a escort engine?

Stuck hydraulic lifter.


What causes a push rod bend or broken?

A stuck lifter, a stuck rocker, a stuck valve, a messed-up cam drive timing and a valve impacting the piston head....


How can you tell if a roller lifter is bad?

This is a toughie. First you have to decide which lifter it is then pull the rocker cover and find the rocker arm that has play in it. Then look at the lifter and where the push rod rides should be stuck down further in the lifter bore than the rest. Or press down on the inside and if it goes down over 1/8 inch and is springy the lifter is bad.


Sticking lifter on v6 GMC sierra?

2003 v6 90000 miles lifter tap for 3-5 min when i frist start it ? Purchase a can of Seafoam Motor Treatment and follow the directions on the can. This will free the stuck lifter. Seafoam helps liquefy gum and varnish deposits helping to quiet noisy valve lifter


How do you switch out of glass fuses on a 71 Buick skylark?

if you want to change fuse type to newer plugin you will need to change fuse box. if you just need to change one fues that is stuck put on saftey goggles and use a pick and lift out the fuse by metal end caps


How do you adjust festiva valves to stop a knocking?

Have the timing checked and adjusted by a mechanic. you may have to replace the lifter valves if they are getting stuck


Dodge Durango. loud knock and rattle. What is a stuck lifter?

A stuck lifter is one that is gummed up with sludge. It is hydraulic and pumps oil. If it is sludged up, then it can't do what it is designed to do. Thus causing a tapping noise. Loud knock are either a rod, rod bearing, knock sensor, rocker arm, valvel spring, timing belt, or possibly just the belt tensioner. If it is a stuck lifter, the cheapest fix would be to run some engine flush in the engine, drain the oil and refill with good oil. If that works it was a stuck lifter. If not, Check with the most accessible first, pull the valve covers and check the rockers and valves. You may need to remove the intake first to access them. If it broke you will see it usually. If nothing is broke then go to the timing belt. Hope this helps.


Why does your battery go dead in your 2000 buick lesabre limited edition?

Dead cell in the battery which will mean it needs replacing. Can also be something is on drawing power from the battery. Any light bulb, or an stuck relay. Check all lights and then all relays.


What is brute force?

If it's stuck, force it. If it breaks, it needed replacing anyhow.