Might be the fuel filter? Fish around in the tank and see if you can retrieve a tube that will connect to it.
it is not useful
Epoxy is your best bet.
There is a nut just above the large black plastic string holder. Hold the nut and unscrew the black plastic string holder (it is reverse threaded). Once the string holder is off, pull the button on the bottom string holder until it comes apart. Wind new string on and put it all back together as you pulled it apart.
The battery is in the rear of the mowers undercarriage covered by a plastic casing. 3 Screws on the outside rear hold the plastic casing to the undercarriage.
Craftsman tool are made from high quality stell and carry alifetime warranty.
What is the bottom cover on a weed wacker called? The bottom plastic part where the string is. just the plate
As an army medic I would say put on ice and wrap in plastic, no Ice keep moist and cool, if no possibility for reattach bag and tag.
It is under the black plastic housing on the side of the engine located just above where the grass clippings exit the mower.
they just pop off with a bit of force. Try not to tear them but there is a large washer that actually holds them on that you are trying to get them over.
It can be, you just have to break the switch
Pull the plastic pin out and then the plastic clip for main drive gear inside opener. Outside gear is made to shaft and you change it from inside using what is described above. This is only for a few models. There are to many. Just get the model # and search it on sears.com (parts) for the part diagram.
on a 1997 Chevy astro it is in a fuse-relay center - in a plastic box located just to the left of the battery. Take off the top; the schematics of what's what should be on the inside top of the box, as well as in your owner's manual.