I have the 505 so I'm assuming that it is the same configuration. I you're holding the bass and look down at the knobs: top left: volume top right: pickup balance bottom left: low eq bottom middle: mid eq bottom right: hi eq I hope this helps
The ones at end of a guitar (on the headstock) are called tuners, tuning pegs or tuning posts. The ones on the front of the body are the control pots/knobs (volume, tone).
Try turning down all knobs on your bass. Some basses have two volume knobs, one for each pickup.
Not that my name references the thing your talking about, but a machine head refers to the metal knobs on the stock of the guitar that you twist in order to tune a guitar and that is what the strings are wrapped around. My name refers to the band.
Its where the strings are stretched over from the tuning knobs. Its sometimes called the 'zero' fret.
Some knobs will have a set screw that you have to loosen (either Allen key or flathead screwdriver). If it does not, try and pull it straight off. If it is stubborn you can try using some penetrating lubricant.
There are two knobs on a guitar. One is the tone knob, which is used when tuning the guitar right pitch and sound you want out of the guitar. The other is for your volume, which is obviously used to toggle between the loudness or quietness of the guitar.
I recommend a Stratocaster, due their wide range within genres. Preferably an American Standard. But an Ibanez will do okay, if you fiddle with the knobs abit.
The ones at end of a guitar (on the headstock) are called tuners, tuning pegs or tuning posts. The ones on the front of the body are the control pots/knobs (volume, tone).
On the head of the guitar there are the tuning knobs. If you tighten them, you get a higher pitch. If you loosen them you get a lower pitch.Hope this helps :D
You turn the knobs to change the pitch. I would reccomend buying a guitar tuner that will show if the string is sharp or flat.
Try turning down all knobs on your bass. Some basses have two volume knobs, one for each pickup.
Not that my name references the thing your talking about, but a machine head refers to the metal knobs on the stock of the guitar that you twist in order to tune a guitar and that is what the strings are wrapped around. My name refers to the band.
Its where the strings are stretched over from the tuning knobs. Its sometimes called the 'zero' fret.
Sure, you can buy cabinet knobs and pulls from FGT Cabinetry LLC. They have a wide selection of knobs and pulls in a variety of styles and finishes to choose from. You can find knobs and pulls to match any kitchen or bathroom décor. Here are some of the most popular cabinet knobs and pulls from FGT Cabinetry LLC: Modern cabinet knobs: These knobs are sleek and minimalist, and they come in a variety of finishes, including brushed nickel, polished chrome, and black. Traditional cabinet knobs: These knobs are classic and timeless, and they come in a variety of finishes, including brass, bronze, and wrought iron. Knobs with crystals: These knobs are elegant and glamorous, and they add a touch of luxury to any kitchen or bathroom. Knobs with crystals: These knobs are elegant and glamorous, and they add a touch of luxury to any kitchen or bathroom.
How many and what pickups are you using?How many volume and tone knobs are you using?What kind of guitar is it?What kind of switch(es) do you have?See the Related link below for more information.
Either effect pedals, the knobs on the bass itself, of the bass-mid-treble controls on the amplifier
Some knobs will have a set screw that you have to loosen (either Allen key or flathead screwdriver). If it does not, try and pull it straight off. If it is stubborn you can try using some penetrating lubricant.