Some knobs will have a set screw that you have to loosen (either Allen key or flathead screwdriver). If it does not, try and pull it straight off. If it is stubborn you can try using some penetrating lubricant.
amp or amplifier
you hit the strings , they vibrate the vibrations are picked up by the guitar "pickups" the pickups transfer the information to the amplifier and out of the amplifier comes the sound without an amplifier you got a really fancy and quiet acoustic guitar.
A tube guitar amplifier basically is a large speaker which contains tubes inside the amplifier box for guitar use. Some are vintage and some are classic.
The ones at end of a guitar (on the headstock) are called tuners, tuning pegs or tuning posts. The ones on the front of the body are the control pots/knobs (volume, tone).
Push the "Effects" knob on your amp to enter edit mode. Turn down the knobs labeled, "feedback", "Level", and "Level" (There are two "level" knobs). Press the edit knob again to exit the editing mode. You should have no more delay (and reverb).
Amp Repair Parts, Ali Express and Guitar Nucleus are great guitar stores to check out to find the necessary amplifier part needed for your musical instrument.
Either effect pedals, the knobs on the bass itself, of the bass-mid-treble controls on the amplifier
You can achieve distortion on a guitar without using a pedal by turning up the gain on your amplifier, playing with more force, or using the guitar's tone and volume knobs to adjust the sound.
You can get amps for your guitar amplifier by purchasing and connecting a separate amplifier unit, also known as a power amplifier, to your existing guitar amplifier. This will allow you to increase the overall power and volume output of your guitar amplifier.
u can go to see and check on wikipedia...there is a page for guitar amplifier..
A combo amplifier for a guitar contains a normal guitar amplifier and one to four speakers. A normal guitar amplifier does not contain speakers, but is able to send the signal to a speaker cabinet.
Yes
To make an electric guitar sound more electric, you can try using distortion or overdrive effects, adjusting the tone and volume knobs on the guitar and amplifier, experimenting with different pickups, and using effects pedals like reverb or delay.
There are two knobs on a guitar. One is the tone knob, which is used when tuning the guitar right pitch and sound you want out of the guitar. The other is for your volume, which is obviously used to toggle between the loudness or quietness of the guitar.
For an electric guitar you definitely need an amplifier because the guitar on its own is pretty quiet. If you play an acoustic guitar you can use an amplifier to make your guitar louder and more hearable but you don't have to in order to record it.
To connect your guitar to an amplifier using a guitar cord, plug one end of the cord into the output jack on your guitar and the other end into the input jack on the amplifier. Make sure both the guitar and amplifier are turned off before connecting to avoid any unwanted noise. Adjust the volume and tone settings on both the guitar and amplifier to achieve the desired sound.
I believe that an amplifier is something to plug your guitar into.