it sounds like you maybe having a ECM problem, if it seems to work better cold and then when it warms up it starts to miss you maybe losing your injector pulse from the ECM. They are having problems with the ecm's from 1989 to 1994 on the Trackers. I repair them for $125.00 with a 5 year warranty.
A cars tach jumps and runs with engine rpm.Sometimes if it jumps and changes engine sound,the throttle position sensor needs changing.If it jumps with no engine speed or sound change it means your alternator is going bad.
You will definitely know if your truck jumps out of time. The engine will run very rough. The engine might not run at all.
NO not that engine.
Thomas the Tank Engine and Friends - 1984 Jack Jumps In 6-7 is rated/received certificates of: Australia:G
Yes, there is a distinct possibility. This is an interference engine, and severe engine damage will occur if the belt breaks or jumps teeth.
If your engine jumps when accelerating, or when certain noises are made when engine torques.
yes they will bend
Bullfrogs move around by taking short jumps.
They run around and then jumps on the animal that the jaguars attacking
YES THE VALVES WILL HIT THE PISTONS IF TIMING BELT JUMPS OR BRAKES YES THE VALVES WILL HIT THE PISTONS IF TIMING BELT JUMPS OR BRAKES
The RPM is the revolutions per minute of the engine. When you are sitting at a light or stop sign the engine is still running and the tach should show the engine RPM's, probably around 650. This is normal.
it shakes rapidly and jumps around crazy.
run a new line to the distributor.
my friend jumps up and down.
*Why are jumps called jumps?In order to clear an "obstacle" of any sort, a horse must jump over it. Therefore these "obstacles" became known as jumps.
Yes that's why he jumps around a lot when being wrestled.
yes indeed it jumps around and one of the species is known from its deadly venom
If it is an interference engine the valves can bend/break.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Yes. The engine is no longer firing in the proper way .If the piston comes up when the valve is open it will bend it..
It is supposed to be a ZERO interference motor. If belt breaks or jumps, NO problem to valves in most cases.
in shonen jumps naruto i think around episodes 218 or 284