Simply Looking at the fuse to see if it's burnt is no guarantee it's still good. Replace fuse number 13 with a 15amp.
THAT IS USUALLY AN INDICATION OF A BURNED BRAKE LIGHT SWITCH. SWITCH IS USUALLY LOCATED ON THE BRAKE PEDAL ITSELF. DISCONECTED AND IF THE LIGHTS GO OUT YOU HAVE FOUND YOUR PROBLEM , SIMPLY REPLACE IT.
1995 ford ranger back-up lights stay on, replaced switch, how do you check for a bad switch
BEHIND THE BRAKE PEDAL
Usually at the base of the brake pedal.
Its the brake switch on the brake pedal. Its a plunger like switch, its usually the only thing on the brake pedal. Its pretty easy and cheap to change.
Could be bad brakelight switch or blown fuse
The 1995 Mitsubishi flasher relay switch and the brake light relay switch can be found beneath the dashboard. Both switches will be on the drivers side of the dashboard, near the brake pedal.
either dimmer switch or blown fuse If you are saying that the tail brake lights are working but the third brake light is not....It may be a defective turn signal switch in the steering column.
Check the switch on the pedal
Under the dash attached to the brake pedal lever.
there is a switch on the console between the seats by the emergency brake.....
Sounds like a bad brake light switch. Located above where you put your foot on the brake pedal.