answersLogoWhite

0


Best Answer

yes.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: If the steering gear is replaced in a 97 GMC Yukon 4WD and it seems like it turns somewhat too hard will it get easier after a break in period or does it need some adjustment?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why does my Power steering only work when its cold?

The power steering pump probably needs replaced. When it's cold the fluid is thicker so it is easier for the pump to have pressure in it when it gets hot the fluid gets thinner so the pump is having to work harder than in the cold


How do you reinstall new seals and internal screw to power steering pump on an '81 Chevy half ton 4 wheel drive?

== == It is much easier to buy a "rebuilt power steering pump" that is guaranteed and has been properly set up at the factory than try to do it yourself. Just bolt it on and replace the belts. No adjustment, no fooling around with it.


What are the advantages of power steering over of manual?

power steering is easier and you do not have to turn the wheel as hard as manually.


How the electric steering work and what is the advantage of electric steering system than the conventional steering?

Electric (Power) Steering works from a hydraulic pumping system, advantages are lighter steering for easier control.


How do you replace the belts on a 1991 Toyota Corolla?

there are 3 belts the alternator and power steering belts can be accessed from the top right sideloosen the adjustment bolts. the a/c belt is easier with car jacked up from underneath, remove the right plastic splash pan.


What does a power steering pump do?

The pump pressurizes the power steering fluid. The fluid travels through the steering rack or steering box to aid in the making the vehicle steer easier.


Advantages of rack and pinion steering?

rack and pinion steering gives easier and more accurate control of the vechile improving handling and steering response


What is the output of a Power steering pump?

The output of a power steering pump is the high pressure side which goes to the steering box. It creates hydraulic pressure which makes steering much easier.


How do you fix a turn signal click that wont go off even after you have turned?

More than likely the mechanism in the steering wheel is broken (usually made of plastic) and the whole thing will need to be replaced. Not an easy job! May be easier and less expensive to get a used steering column and replace the whole thing.


Why power steering is used?

From what I understand, power steering in cars (vehicles) is simply to make steering the car easier. If it were not for power steering, you would have to use a lot more muscle to turn the steering wheel than you use when you have that power steering in place!


Why did the agricultural adjustment act raised crop prices?

by making smaller farms that were easier to manage


Why is the steering on your Chevy truck extremely hard at idle and a little easier when rpm is higher Should you replace the pump?

It depends: does your truck have power steering or manual. Keep in mind that while driving a car with speed, power steering or manual, much less movement needs to be made on the wheel to make a bigger turn adjustment. If you have power steering, and it is hard to turn at any rate, check the fluid, belt, and check for leaks. if you cant find whats wrong and you still have a problem turning the wheel, it probably the pump going out. If you have a truck with manual steering, it might be normal.