If they are both Windows computers, and they are connected to the internet, then they may not see each other unless they are part of the same Workgroup or Domain. Your computer is assigned an IP address by your router when it starts up. Domains are only used at businesses and other organizations with many computers, Workgroups are used on small LANs without a domain controller. In either case, you only need the Names of the computers for them to connect to each other, and you can browse for other devices in the same Workgroup or Domain. They both run the TCP-IP networking protocol, and they both use DNS to find other computers on the internet. The MAC address is a unique number of every network device and is the fundamental way they all communicate with each other. It is like your MAC (physical) address compares to your IP Address (e.g. a phone number), but you don't need to worry about it as it is automatically configured for you.
If your only doing a bit of file sharing or printer sharing then all you (as a user) would need is the IP address (though usually you would use the name) of the computer you want to contact.
That is actually the way the computers connect. Parts of the IP address are used to route the data to the correct ISP, and the rest are used for the network can find the other machine. If you use any site, they already know your IP address, since that is necessary so the servers will know where to send the data.
It is called "IP address". A typical example, using private addresses, is:IP address: 10.0.0.5Subnet mask: 255.255.255.0Default gateway: 10.0.0.1IP address will be different for different computers, but typically all will start with the same 3 bytes, in the example, "10.0.0". Subnet mask and default gateway will be the same for several computers in the same network.It is called "IP address". A typical example, using private addresses, is:IP address: 10.0.0.5Subnet mask: 255.255.255.0Default gateway: 10.0.0.1IP address will be different for different computers, but typically all will start with the same 3 bytes, in the example, "10.0.0". Subnet mask and default gateway will be the same for several computers in the same network.It is called "IP address". A typical example, using private addresses, is:IP address: 10.0.0.5Subnet mask: 255.255.255.0Default gateway: 10.0.0.1IP address will be different for different computers, but typically all will start with the same 3 bytes, in the example, "10.0.0". Subnet mask and default gateway will be the same for several computers in the same network.It is called "IP address". A typical example, using private addresses, is:IP address: 10.0.0.5Subnet mask: 255.255.255.0Default gateway: 10.0.0.1IP address will be different for different computers, but typically all will start with the same 3 bytes, in the example, "10.0.0". Subnet mask and default gateway will be the same for several computers in the same network.
they are all connected through the same internet or an line web
We can have same ip address on two or more computers in the SAME network; both working simultaneously. They should be in same collission domain. Let their MAC address be same first & then assign them same ip address. You can do so by using a network hub. Watch my associated video on www.metacafe.com/channels/austinium2002/
It can, I recommend changing the computer's IP Address. By the way good game.
Same way as you communicate with anyone, anywhere, using email. You need an address, then you write to them.
Each computer has a unique name, IP address and MAC address. (not MAC as in McIntosh.)
The same thing as networking in Windows or OS X: The system by which Linux will be able to communicate with other computers.
yes
No two computers may have the same IP address. This will cause both systems to crash.
No, an IP address is given to each internet provider, not each computer. For example, there could be five computers hooked up to the same network in which case they'd all have the same IP address.
windows will flash up and tell you there is a conflict