0
If you are building a 28x16 deck how many 5-4x6x8 deck boards do you need?
Tmaggart
approx 112 boards better get 115 to be sure.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How many Multiples of two ate there in a deck of cards?
20 of them.
How many prime numbers are in deck of 52 cards?
27
How many even number cards are in deck of cards?
There are 20 such cards.
What is the weight of a standard 2x4?
It varies. Is it yellow pine,spruce,and wet or dry ? A 2X4 Spruce/ Pine/ Fir KD 1.375 lbs per foot ( Used for interior building in projects New England ) 2x4 Pressure Treated southern yellow Pine 2.175 lbs per foot. (Used for exterior building projects ie. Deck railings) That actual weight will vary depending on exactly which species, and how dry / wet the wood is. But these are generally excepted weights we use in calculating shipping weight for these types of wood.
How many numbers are prime in a deck of cards?
2, 3, 5 and 7
Do you stain the bottom of a cedar deck?
Best to get all six sides of the boards while you're building (if you can).
Where can I get a deck plans calculator?
Deck building calculators to help calculate concrete, joist and beam span, stair stringer layout, baluster, deck boards and deck load too. hi there here it is
Cost for azek deck building material?
Azek deck boards can be purchased for around $3.00 / lf on the internet, 15-20% higher at lumber yards.
How to Fix Bowed Deck Boards?
Even if you use a good supplier for your lumber, you might find that many of your deck boards are bowed. This can create gaps and sloppy look for your deck. To straighten out bowed deck boards, simply place the deck board against the others with the bowed side in and nail along the length until it is even with the other boards.
How many 1X6x12' deck boards to cover 800 sq ft?
How many 1x6x12 deck boards to cover 800 sq.ft
How many boards do you need for a 6'x12' deck?
It depends on the size of the boards.
Can you butt composite deck boards?
Yes
Give Those Deck Boards a Little Space?
To achieve a faultless finish on your new deck, be sure to stagger the joints when you install the deck boards. When nailing the deck boards on to the frame, be sure to leave even spacing between the boards. Most experts recommend 1/8 inch between two inch boards. To avoid measuring over and over, simply place a 16d nail between the boards to keep them in place and insure you have the right measurement.
If you were building a 12x12 deck would you use all 12ft deck boards or stagger 4's and 8's?
Stay with the 12 footers, saves so much time and will be plenty strong enough since your deck is not bearing a constant load such as walls and a roof.
Where to buy zero Tech Deck boards?
the stores
Who invented Tech Deck finger boards?
adam
Where can one find help and tips when building a deck?
I am looking to build deck on my home. Where can one get help with building a deck?
