A 1998 Ram with the Cummins diesel has a water in fuel indicator on the dash that will illuminate if there is water in the fuel filter housing.
A scan tool is required to clear the check engine light. If the failure is not repaired, the light will return.
there is no light chime fuse
You reset the check engine light with a scan tool after repairing the failure.
If you mean versus a diesel, it is because the diesel parts need to stand up to higher cylinder pressures of a diesel engine. The engine needs to have thicker cylinder walls, deck, pistons, connecting rods, crank which all added up. Most big diesels still use cast iron block for the added strength, which can be 150+lbs heavier. for example: 12v 5.9L cummins: 975lbs 24v 5.9L cummins: 1,150lbs. Dodge 5.9L gas :650lbs
The wait to start light on a 92 Dodge Diesel truck can be caused by a lack of fuel to the engine. It can also be caused by a wiring problem.
my 02 is 1060 or 1100lbs --this is for a cummins 5.9 in a light truck. An N-14 is a heavy truck engine. They weigh over 3000lbs.
The stop engine light might not come on on your N14 Cummins when the switch is off.
With a scan toolWith a scan tool
Check the vacuum lines on the driver side of the engine.
How do you reset engine light on jeep liberty diesel
1. Injectors need a service ?
Only need drained when water in fuel light comes on. Filter needs changed every 15,000 miles or once a year.