Want this question answered?
ALWAYS, ALWAYS, ALWAYS connect the (+) cable FIRST. The reason it sparked was the ( - ) negative cable was already connected.
No, always connect the negative last.
imac always slow the network when connected with windows linked computer in the network
A switch is used to connect or disconnect a load from a source of voltage. If you take the input and connect directly to the output the result is that the connected device is always on.
Connect a ground wire to what? If you mean from the engine block to the firewall or frame - it ia always recommended that a grounding strap be connected between the two.
Your are always connected, there are many ways to entertain yourself ;) Being able to connect to the Internet makes everything so much easier. Communication is pip easy, being able to connect to someone on the other side of the globe can be done in an eye blink. One disadvantage is always being some how connected to the net. Privacy is at risk.
Series connect it within the line of the circuit for which you are interested in measuring the current flow.More detailSince we measure the flow of current IN the circuit, the ammeter must be connected in series with the part of the circuit for which you are interested in measuring the current flow.One of the ammeter's terminals must be connected to a point of the incoming current flow and its second terminal must be connected to the point of on-going current flow. To do this, cut the relevant circuit wire and connect one terminal of the ammeter to each end of the cut.
Are the closures and interiors of connected sets always connected, or the set of interior points? The Answer: No. There isn't always a connection inside connected sets.
It doesn't really matter which way around you use a transformer, the primary winding is ALWAYS whichever winding you connect to the supply, and the secondary winding is ALWAYS whichever winding you connect to the load. For either connection, the turns ratio will ALWAYS equal the voltage ratio for an ideal transformer (or close enough for a real transformer).
Information
No, the ground cable gets always disconnected first and connected last, regardless of ground polarity.
yes it hasexplained belowThe Adminpak.msi file that is available for Windows XP is commonly used to remotely run administrative tasks on Microsoft Windows 2000-based and Microsoft Windows Server 2003-based computers and domains. The Adminpak.msi file includes a version from the Tsmmc.msc file that is called Remote Desktops. This tool (formerly known as Terminal Services Connections) is available as an MMC snap-in.Windows Server 2003 provides the ability to connect to the console (session 0) of a computer by using a Remote Desktop connection. Because of this, a Connect to Console check box is available in the user interface, but this feature only works when you connect to a Windows Server 2003-based computer.It is still possible to use the Remote Desktop tool to connect to a computer that is running Microsoft Windows NT 4.0, Terminal Server Edition, or Windows 2000 Server with Terminal Services enabled, but this creates a regular Remote Desktop Protocol (RDP) session. The option to connect to the console session is ignored.However, if you connect to a Windows XP Professional-based computer with Remote Desktop enabled, you will always connect to the console session whether or not the Connect to Consolecheck box is selected because Windows XP Professional allows only this one specific remote desktop connection.