When a vise grip is used, the tool tightens the pipes around the leakage, which as a result of tightening the pipes, will stop leaking. This is the best option in stopping a leakage.
angle of the exhaust is to produce more power like the toyota supra almost all the exhaust are angled out so they get better flow which means more power the inlet is for different types of pipes like 2 inch inlet for a civic and 3 inch inlet recommended for turbo performance cars. inlets are to fit multiple different types of cars
The crossover pipes on a 7.3 ford diesel engine are the pipes connecting the exhaust manifolds to the turbo compressor inlet.
0.2 x(dia of pipe)x(length of pipe) For examble if you have 100mm diameter pipe and 50 m length .. 0.2x0.1x50= 1 litre and this is your allowable value
A multiple well header system includes an upright header, a plurality of inlet pipes and an outlet pipe. The header has a substantially vertical orientation relative to the ground. The inlet pipes are for interconnection with separate gas wells to allow for passage of methane coal gas and water vapor entrained with the gas there through. Each inlet pipe is mounted to a continuous sidewall of the header through an inlet opening of the header. Each inlet pipe is in communication with an interior chamber of the header. The water vapor enters the interior chamber of the header through the inlet pipes and separates from the gas and falls to and condenses above and within a water collection area of the header. The gas enters the interior chamber of the header through the inlet pipes and rises to an upper end of the header. The inlet pipes are arranged in series vertically and in a plurality of horizontal pairs on the header. The outlet pipe is for interconnection with an external location. The outlet pipe is mounted to the sidewall of the header above the inlet pipes and is in communication with an outlet opening of the header such that gas which has risen within the interior chamber of the header enters the outlet pipe for conductance to the external location.
pressure in pipes
Steel pipes for high pressure is used.
old diesel with no electric ignition. fit snorkel pipes on inlet and exhaust
Sounds like an air leak in the inlet hoses. check the inlet pipes from the air filter to the inlet manifold for splits
i would place the inlet closer to the bottom and the output closer to the top on the opposite side of the aquarium