answersLogoWhite

0

Lower steering column, It is mounted on the top of the lower portion of the column, if you need more help let me know I can guide you through the job.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How do you remove ignition switch from a 1997 Pontiac trans sport?

To remove the ignition switch from a 1997 Pontiac Trans Sport, first disconnect the negative battery cable to ensure safety. Next, remove the steering column covers by unscrewing the screws holding them in place. Then, locate and disconnect the wiring harness from the ignition switch, and unscrew the ignition switch from its mounting bracket. Finally, carefully pull the switch out to complete the removal process.


Why would the starter on a 1977 trans am not be getting power?

Have you checked the ignition switch on the column . I had to replace the one in my 1977 Trans Am.


How do you change the ignition switch on a 1991 Pontiac grand am tilt steering automatic trans?

I don't know how to change the ignition switch but I have some advice. Don't screw with the ignition switch, buy the whole steering column. It will be cheaper and easier to change.


Where is the ignition switch located in a 1997 Pontiac trans am?

Try under the dash near the glove box.


How to Wiper switch removal 2002 trans am?

the steering wheel has to be pulled off so you can get to the upper cover on the steering column to take the screws out to get it off and then you can get to the switch.


Why doesn't your starter kick on when you turn the ignition switch in your 1997 Nissan 200SX SE-R?

I can think of 5 things, if battery is charged, 1. Ignition switch has went bad or out of ajustment.2. Manuel trans- Clutch safety switch bad or out of adj. ( should be under dash.3. Auto trans. Neutral safety switch bad out of adj. 4. Starter bad5. If has one, starter relay bad


How do you disarm a kill switch in a 98 Trans Am?

There is no kill switch on a 1998 Trans Am.


Why wont your 1992 Camero Engine rotate when you attempt to start it?

bad battery or cables. Automatic trans not in park. Broken loose connections at the starter or ignition switch. Starter moter pinion jammed in flywheel. Bad starter, or ignition switch. Seized engine.


On a 1980 280zx auto trans it wont turn over unless you jump the starter is there a neutral safety switch somewhere?

first check all of your fuses and relays. you may need a new starter or ignition switch


What are the procedures for replacing a neutral safety switch on a 1994 ford explorer?

THE SWITCH IS ON THE TRANSMISSION IT IS CALED A TRANS RANGE SWITCH TR SWITCH IT IS MOUNTED ON THE SIDE OF THE TRANS WHERE THE LEVER THAT SHIFTS THE TRANS YOU NEED TO REMOVE THAT LEVER I THINK THE TRANS NEEDS TO BE IN NETERAL THE PART WILL HAVE INST WITH IT HOPE THIS HELPS


How do you change the neutral safety switch on a 1999 Jeep Grand Cherokee Laredo 4x4?

the neutral safty switch is located in the trans range switch if you have an aw4 auto trans replace or clean and reinstall the switch


Where is the backup switch on a 94 Saturn?

on the trans