check this out: www.therangerstation.com/tech_library/seats.html that's a good site. but with the 94 you can use any seat, even bucket seats, from 89-98 and not have to modify the brackets on the bottom.
I had a similar problem and it turn out to be the ABS valve located on the frame rail on the front driver side of the vehicle.
i just replaced my rotors on my 97 ranger , they werepitted and warp and could not be turned
I had a bad right front wheel bearing on my 2004 ford ranger 4X4. When the mechanic took it for a ride he swore it was the left front wheel bearing that was bad but when he got it on the lift it turned out to be the right front.300 dollars for the part and 85 dollars for the labor plus tax.
No, there is not a front bench seat.
4 in the front on the bench seat, v2 per side, and a passenger driver, for a total of 6, but this is packed in.
what 2008 and 2009 SUVs or Hybrids offer front bench seats? suvor
are there struts or shocks on the front of a 1994 ford ranger 2wd
When you have a bench in front of you, a bench step up is when you step up onto the bench, take that foot off to replace with another foot, then back down.
you have to do a front flip while tucked up
A 1995 Ford Ranger has shock absorbers on the front and rear
it is in the front right hand side under the splash guard. you need to remove the front right wheel and the front part of the splash guard and you will get at it from there. but don't mix up the pipes going to it.
how do i replace front wheel bearinbs on 2000 ford ranger 4wd