Inductor impedance is given by jwL, where w=2*pi*frequency. Therefore as the frequency increases the impedance of the inductor increases, causing a larger current flow and a larger power dissipation across the inductor
yes
Inductors and capacitors are called reactive elements in electric circuits.these reactive elements also offer resistance in the circuit termed as reactancefor inductor it is wL (-j)for capacitor i is 1/wC (j)where L,C and w are inductance , capacitance and frequency of the AC source respectivelywhen clubbed with resistance the the resultant of the resistance and reactance gives us the impedance of a circuitif the impeadence(R=0) of the circuit is of inductor only then these are called as purely inductive circuitsif the impedence of the circuit is dominated by inductor ( wL > 1/wC ) even though the circuit has resistance and capacitor then these circuits are called inductive circuits
an Hartley oscillator uses a tapped inductor ( i.e an inductor with an additional connection at a suitable position in turns of the coil. ) with a specific tap ratio as per the circuit gain and design. For Low Frequency oscillators large inductances are required which have large number of coil turns. It is possible to get suitable ratios for such values hence this circuit is prefered.
The frequency at which the impedance of the circuit becomes zero is known as resonance frequency. Actually at resonance resistance only presence in the circuit. That means the impedance of the inductor and capacitor will automatically vanish.
The circuit has one inductor and capacitor connected in such a way that it produce the resonance condition for only one frequency. on the other hand for double tuned circuit it has more number of reactive elements and it has two tuning frequency. The single tuned circuit is of interest when the poles are imaginary, and rest of the two cases are not more interest. w=wn the time it produce the resonance and the damping factor zeta is zero and the circuit is in undamped condition.
Current in a purely inductive circuit lags the voltage by 90 degrees. The apparent power in such a circuit will be zero, because the power factor is zero, however, energy will still be transferred, and VARs (Volt-Amps-Reactive) will be non-zero.
The resistor is the only component to develop true power in an ac circuit. The inductor and capacitors absorb energy on one half cycle and return it to the supply on the next. The resistive part of the inductor (wire coil if low frequency type) will develop true power due to its value of resistance ie it will get warm.
No. You have to consider the inductor and the capacitor. Impedance of RLC circuit is equal to to the Value of Resistor Only AND Only on Resonate frequency. otherwise u have to cnsider resistance inductance and capacitance together in series.
Inductors and capacitors are called reactive elements in electric circuits.these reactive elements also offer resistance in the circuit termed as reactancefor inductor it is wL (-j)for capacitor i is 1/wC (j)where L,C and w are inductance , capacitance and frequency of the AC source respectivelywhen clubbed with resistance the the resultant of the resistance and reactance gives us the impedance of a circuitif the impeadence(R=0) of the circuit is of inductor only then these are called as purely inductive circuitsif the impedence of the circuit is dominated by inductor ( wL > 1/wC ) even though the circuit has resistance and capacitor then these circuits are called inductive circuits
an Hartley oscillator uses a tapped inductor ( i.e an inductor with an additional connection at a suitable position in turns of the coil. ) with a specific tap ratio as per the circuit gain and design. For Low Frequency oscillators large inductances are required which have large number of coil turns. It is possible to get suitable ratios for such values hence this circuit is prefered.
Yes, an inductor is a short circuit to dc...that's true....IF the inductor is an ideal one, that is, the inductor has no resistance but has inductance only. Anything in real world, as you know, is not ideal. An inductor is usually made of a copper wire. A copper wire has its own resistance. If an inductor coil is thin and long (i.e. many turns), it will provide an appreciable resistance to DC, and will no longer be a short circuit.
acceptor circuit is the circuit which accepts only one frequency and reject the others
The frequency at which the impedance of the circuit becomes zero is known as resonance frequency. Actually at resonance resistance only presence in the circuit. That means the impedance of the inductor and capacitor will automatically vanish.
The impedance of a component (inductor or capacitor) will change with frequency - resistor impedances will not. Inductor impedance - j*w*L Capacitor impedance - 1/(j*w*C) L = inductance, C = capacitance, j = i = imaginary number, w = frequency in radians The actual inductance and capacitance does not change with frequency, only the impedance.
As a parallel resonance circuit only functions on resonant frequency, this type of circuit is also known as an Rejecter Circuit because at resonance, the impedance of the circuit is at its maximum thereby suppressing or rejecting the current whose frequency is equal to its resonant frequency.
No, the resonant frequency of a RLC series circuit is only dependant on L and C. R will be the impedance of the circuit at resonance.
The circuit has one inductor and capacitor connected in such a way that it produce the resonance condition for only one frequency. on the other hand for double tuned circuit it has more number of reactive elements and it has two tuning frequency. The single tuned circuit is of interest when the poles are imaginary, and rest of the two cases are not more interest. w=wn the time it produce the resonance and the damping factor zeta is zero and the circuit is in undamped condition.
Increase in frequency only.