Want this question answered?
Add 4 quarts, run engine for about 30 seconds and top off to the full mark with the dipstick as a gauge.
If there is no dipstick then there will be a fill hole either on the top or the tranny or on the side. It will be easier if you can put it up in the air to see.
You add it through the dipstick tube.You add it through the dipstick tube.
You add it through the tranny dipstick hole, pull the dipstick out and add the fluid.
3.5 to 4.25 qts add 3.5 then check the dipstick if you cant find the dipstick take it to a shop
It is usually one quart from add to full.
You'll need a pressure gauge and know how to use it. The gauge will tell you when you have the right amount in.
pull the tranny dipstick out and add the fluid through the dipstick tube.
You can but it is much easier to add it through the oil filler port.
You add it down the transmission dipstick tube with a funnel.You add it down the transmission dipstick tube with a funnel.
there is not usually a gauge for transmission fluid while the car is running you must pull the dipstick under the hood wipe it of reinsert and take out dipstick to read the results on bottom of dip stick there should be a hot reading line the fluid should come to .....or it could possibly say full or add also
Down the dipstick tube.Down the dipstick tube.