How ti install a drive belt on a john deere 240 lawn mower?

Answer 1

You need a good socket set and a torque wrench. Remove plastic covers from right and left sides. Belt guides must be loosened (but do not take nuts completely off, just enough to get new belt on), Start the belt from the back and work it over the left and right guides, tighen nuts (torque back to 35 lbs), then work belt around the tension guide, now with torque wrench still on tensioner, use the wrench to pull the tensioner forward and work belt over the front engine puller, tighten tension pully nut to 35 pounds and replace covers. I use Honda-tight (blue) will all nuts and fastners.

Answer 2

You can replace the drive belt, on a JOHN DEERe LA105, by loosening the tensioner pulley. When the pulley is loose the belt will come right off.

Answer 3

how do i install drive belt for 245 john deere

Answer 4

with alot of patience