First, drain the radiator coolant by removing the drain plug on the underside of the radiator. Disengage the ducts, hose, fan, clutch, and belt attached to the water pump. Then, separate the water pump from the block and discard the two gaskets that will be revealed. Prepare the new water pump by cleaning the edges and attaching new gaskets with a high temperature automotive sealant. Install the new water pump and secure. Replace the belt, clutch, fan, hose, and ducts as well. Reconnect the drain plug and fill with coolant, then rejoin the negative cable to the battery.
Very helpful!
you now get over it
look in the manual
That is what the big fan on the front of your engine is bolted to.
It is in the middle between the intake and the water pump.
That is what the fan is bolted to that's on the front of your engine.
maybe the heater core.
3 to 4 hundred dollars
Nothing last forever. Replace water pump it's worn out.
50/50 mixture of DEXCOOL and water
About 2 and 1/2 hours.
It is located behind the fan and mounted to the engine block with 4 bolts.