You need an internal thread chaser to do it. They come in a set with the external thread chaser.
Changing the gears on a lathe enables it to cut certain pitches of threads.
The only sure method is to have the appropriate internal (female) thread eg. a nut available and to try this on the cut thread. If the fit is too tight then another cut or pass must be made on the lathe. If you are cutting both male and female threads to match then cut the female thread first and use it to check the cutting of the male thread. Submitted by Bill Lavery
refers to the threads per inch for example screw cutting
Internal threads are threads inside of a hole in something. Like a nut, for instance. External threads are threads on the outside of a cylindrical object. Like a bolt, for instance. hth, Steve
Pitch measurement refers to the distance from one thread to the next when threads are cut on a lathe. Different threads have different pitches and a lathe can be set to to cut to any specified pitch. This is achieved by selecting the pitch and engaging the lead screw on levers located on the headstock, then engaging the half-nut around the lead screw from the apron. With the correct threading tool inserted threads can be cut into the workpiece.
v threads
The tool for cutting internal threads is called a tap. A tool for cutting external threads is called a die.
presuming you mean the lead screw on a lathe, used when cutting threads on the workpiece, then the screw itself is obviously fixed, but the rotation of it may be able to be changed, depending on the lathe manufacturer.
A lathe is an in the first instance an engineering machine used for turning metals into specific shapes and diameters, adding threads for screw, creating threads for bolts, boring . Woodlates (their predecessor) turning bowls , cutting threats on wood, convex and concave shapes
Taps and dies are are tools for cutting threads in metal. A tap is a bolt like tool for making for making female threads ,a die is a nut liked tool for making male threads. They are used for cutting internal and external threads
Google the following: "tap and die"
The lead screw moves the turret by a precise increment for every rotation of the screw. This allows the machine to generate threads in a workpiece, to generate precise length and diameter dimensions, and to maintain a constant rate of metal removal.