0
What else can I help you with?
Can you put a 100w metal halide bulb in a 150w metal halide fixture?
Yes, you can put a 100W metal halide bulb in a 150W metal halide fixture, as long as the fixture is compatible with the bulb's base type and voltage requirements. However, the bulb will operate at a lower output than the fixture's maximum rating, which may affect performance and light quality. Always check the manufacturer's specifications to ensure safe and proper usage.
Which bulb will glow brighter with 220V - 40W or 400W?
-- The voltage makes no difference. -- The 400W device dissipates ten times as much power as the 40W device does. We don't know how much of each one's power consumption is radiated in the form of heat, UV light, etc. But if the spectral distribution of their output is similar, then the one that dissipates more power produces more visible light, and appears brighter.
Can a 175 watt metal halide bulb be used in a 100 watt ballast fixture?
No, a 175-watt metal halide bulb should not be used in a 100-watt ballast fixture. The wattage of the bulb must match the ballast's rating for optimal performance and safety. Using a bulb with a higher wattage than the ballast can lead to overheating, reduced lifespan, and potential damage to both the bulb and the ballast. Always ensure compatibility between the bulb and ballast specifications.
Is halide atom larger than the halide ion?
Yes
What happens when you use a higher wattage metal halide bulb?
It uses more power (watts) than before, it produces more heat, and also more light.
Is Led lumen better than metal halide lamps?
Metal Halide lamps produce many more ANSI lumens than an LED lamps. However, given this fact, many manufacturers are focusing their production on LED technology because they produce light that lasts 4 to 10 times longer, and they do not get hot like metal halide lamps.
Why does one 120v 400w fixture light a metal halide bulb less brightly than the rest of the fixtures in the room even with a new bulb?
It seems most likely to me that the ballast of the dim one is bad--metal halide bulbs aren't simply connected to the 120 V line voltage but need a "ballast" for several functions, including producing a high enough voltage to start them and regulating the current through them. If one was bad (or was designed for a different bulb), that would explain everything. One other possibility is that there's a wiring problem and either the dim one isn't getting a full 120 V, or the others are getting more than 120 V. If this is a three-phase commercial installations there are various ways to mis-wire things and get odd voltages; in a residential system, you'd pretty much either have 120 or 240, and the 240 would probably quickly overheat a ballast made for 120, so that doesn't sound likely.
Can you use a smaller watt bulb in a bigger fixture will it run at bulb watt or fixture watt?
Yes, because the "higher" watt energy saver bulb (cfl) is actually a lower watt bulb than a standard (incandescent). Always look at the actual watts, not the 'light equivalent watts'. 11 watt low energy tube = 60 watts of old-fashioned light. More light, less heat!
How many leds and watts to replace a 250 watt metal halide?
It depends. The Wattage ratings do not indicate how bright any type of bulb is, just what its power consumption is. In general LED lamps put out more light for the power used than metal halide bulbs, but there is no standard as to how much more. Most lamps indicate their candlepower or 'candela' ratings on the package, and the vary by type of bulb and manufacturer. The 'candela' is the SI base unit of luminous intensity.
Can you replace a 500w power supply with a 400w?
Yes, you can replace a 500W power supply with a 400W one, but it depends on your system's power requirements. If your components draw less than 400W under peak load, the 400W supply may work. However, running a power supply close to its maximum capacity can lead to reduced efficiency and potential overheating. It's generally recommended to use a power supply that exceeds your system's wattage needs for optimal performance and longevity.
Would bromine displace chlorine from a halide?
Yes, bromine is more reactive than chlorine and can displace chlorine from a halide. This reaction involves the displacement of the less reactive element (chlorine) by the more reactive element (bromine) in the halide compound.
Can a potato light a light bulb better than a battery?
i would say no because the battery has a lot of energy to pass to the light bulb and not a pataoe
