R22 r123
You cool it and run it through a metering devise.
r 134-a
what happens when refrigerant enters the condenser
No , a high temperature high pressure ( gas )
It passes heat out of the high pressure high temp vaporized refrigerant so the it becomes a high pressure lower temperature liquid.It passes heat out of the high pressure high temp vaporized refrigerant so the it becomes a high pressure lower temperature liquid.
Cycles refrigerant through the system and changes the state of the refrigerant from a low pressure vapor to a high pressure vapor.
Starting at the compressor;Low pressure vapor refrigerant is compressed and discharged out of the compressor.The refrigerant at this point is a high temperature, high pressure, superheated vapor.The high pressure refrigerant flows to the condenser by way of the "Discharge Line".The condenser changes the high pressure refrigerant from a high temperature vapor to a low temperature liquid and leaves through the "Liquid Line".The high pressure refrigerant then flows through a filter dryer to the Thermal Expansion valve or TXV.The TXV meters the correct amount of liquid refrigerant into the evaporator.As the TXV meters the refrigerant, the high pressure liquid changes to a low pressure, low temperature, saturated vapor.This saturated vapor enters the evaporator and is changed to a low pressure dry vapor.The low pressure dry vapor is then returned to the compressor in the "Suction line".The cycle then starts over.
The refrigerant pressures are dependent on the type of refrigerant.
high pressure vapor
Add refrigerant vapor on the low side of the system ,the compressor raises the pressure of the refrigerant on the high side of the system and lowers the pressure on the low side
Add refrigerant vapor on the low side of the system ,the compressor raises the pressure of the refrigerant on the high side of the system and lowers the pressure on the low side