Monoblock amp? No. Only 1 channel which is good for one speaker, or one sub.
What you need is either a 2 channel amp or a bridgeable 4 channel amp, which would be overkill anyway. If the amp you have is 2 channel, it would be ideal.
Yup
A mono amp will not sound good with door speakers. There are to be used with subwoofers
There is no frequency of mono. Mono is a one channel signal, stereo is a two channel signal.
Certainly, you can also use 2 mono amps to power left and right stereo channels. One for each channel. Using one mono amp for stereo results in a mono output though.
Monoblock amp? No. Only 1 channel which is good for one speaker, or one sub. What you need is either a 2 channel amp or a bridgeable 4 channel amp, which would be overkill anyway. If the amp you have is 2 channel, it would be ideal.
Connecting speaker leads to both right outputs, A&B, will only play the right channel of the sound (in mono) when both pairs of speakers, A and B are turned on. This won't damage the amplifier or speakers, but you won't be listening in stereo.
It all depends on what your using it for, in example. If you have a 400 watt 4 channel amplifier then that means you can hook up 4 units to the amplifier at a 100 watts each (4x100=400). these units could be things such as door speakers, tweeters, mid ranges, anything that produces sound. A mono is no better than 4 channel it is just used for a different purpose. Mono or Mono-block amplifiers are used for subwoofers because they only have one slot to exert power from so the whole power of the amp is distributed to one source. The cool thing about 4 channel amplifiers is that you can get some decent aftermarket door speakers and hook them up to your 4 channel, turn on your high pass frequency filter, and blast those speakers as loud as you want without having your bass drown them out.
Yes
They run mono, and are if you have the Jbl systemin your Lincoln these 6x8 speakers are used purely for bass.
A mono (single channel) amplifier may be used for powering a subwoofer.
Mono is a type of sound on a set of speakers. There are two, mono and stereo. Stereo is the opposite of mono, so say a person is speaking on the right side of the screen. In stereo, the speaker's voice comes from the right speaker. In mono, though, the speaker's voice comes out of both speakers. Most people prefer stereo because it makes the experience more realistic.
u can bridge it to 2 channels not one to make it a mono block