Is a 98 ford explorer Eddie bauere 4x4?

where is the 4x4 fuse located in a 2002 ford explorer.

I would suggest the Ford web site.

how does 4x4 auto work

Yes it will fit correctly.

where is the cam shaft position sensor on a 98 ford explorer 4x4 4.0 sohc 4x4 ...

If this is an automatic transmission ( no ) * starting with the 1995 model of Ford Explorer the automatic transmission was electronically controlled ...

the 4x4 might not be engaged right

On a 1997 Ford Explorer 4x4 : The transfer case is bolted to the rear of the transmission underneath the vehicle ...

It's in the center stack of the dash , just to the left of the radio

14 city / 18 highway ( miles per U.S. gallon ) 4x4 , automatic

The transfer case makes it 4x4 not the transmission. As long as the trannys are the same should work ...

On a 1996 Ford Explorer : Yes , assuming it's not the Eddie Bauer version with the 16 inch wheels ( my 1995 Ford Explorer " XLT model " , 4x4 , has always had P235/75/R15 all terrain tires on it right from the factory ) ...

Just push the button in the middle of the dash above the climate controls. There should be 2 buttons. 1 says "4X4" the other says "low range". You want to push the one that says 4X4. I'm a proud owner of a 92 Ford Explorer Eddie Bauer. You will have to be in neutral to get it to go into low 4x4. ...

What type of transmission fluid do I need for 94 ford explorer

what other engine years are compatible with a 2000 ford explorer

My 1995 Ford Explorer XLT , 4x4 , automatic had a shipping weight of 4,053 pounds ...

The 1994 is an ( A4LD ) The 1995 is a ( 4R55E ) electronically controlled transmission ...

For the control trac 4x4 system , just to the right of the radio are buttons showing 4x4 auto , 4x4 high , 4x4 low ( on a 2002 Ford Explorer ) ...

A 1994 Ford Explorer 4X4 can be painted any color desired by the owner. It may need to be sanded and have rust removed before paint is applied. ...

having trouble removing the transmission oil pan from a 1998 explorer sport 4x4. need photos. ...

No , starting with the 1995 model year of the Ford Explorer the automatic transmissions were electronically controlled ...

My 1995 Ford Explorer XLT , 4.0 liter V6 , automatic transmission , 4X4 had a shipping weight of 4,053 pounds ...

Starting in 2002 , the Ford Explorer 4 door models do not have an automatic transmission dipstick ...

My 1995 Ford Explorer XLT / 4x4 / automatic had a shipping weight of 4,053 pounds ...

Open your drivers door and look at the stickers on the end of the door - you will find the tire size that originally came on the Explorer and the recommended tire inflation pressure ...