no special tools required except a plug wrench
most socket sets have plug sized sockets in them
You have to get a special intake that you can bolt a carburetor to.
NO, the timing change is designed to last the life of the engine. It is normally changed when the engine is overhauled. Not other maintenance is required.
Service required is the oil change reminder. Service engine soon would be the check engine light.
Depends on the engine, but most of the time it is not required.
The clutch disconnects drive from the engine to the wheels. It is required to change gears.
Is it required to change the crush washer on the engine oil pan drain plug
4.5 quarts with engine oil filter change for your 3.0 L Vulcan V - 6 engine
VERY, VERY big job. The engine and transmission assemblies need to dropped out the bottm of the car along with the frame. Then the engine can be separated from the trans and the new engine installed on the assembly. Many special tools required for this job. Expect a 3-4 day job for an experienced tech. Tech JK ------------------
This is a job that is best left up to the experts. Special tools are required and severe damage can be done to the engine if the repair is not done correctly. The fact that you ask the question, shows that you do not have the skill level and knowledge to do this job. Take it to an expert.
4.5 quarts with oil/filter change.
The check engine light comes on when the ECU detects a problem with the emission system. The maintenance required light comes on when some maintenance is required on the vehicle such as an oil/filter change.
No special training is required. Just be sure to only fill it with disel gasoline. If not you can wreck your engine. This depends on a number of factors. A CDL is required if the vehicle has air-brakes, I don't remember the weight limit but I believe there is one. The most important factor is if its for personal use(You don't use it for commercial use, or make money off it in any way) Then a CDL is not required.