0
No it is not considered a load. A load transforms electrical energy into other types of energy :)
What else can I help you with?
What is on load and off load switching?
On load switching is when a switch can be operated whilst current is still passing through the switch (i.e. it is on load) Offload switching is when a switch is operated whilst there is no current through the switch (i.e. it is offload)
What is the least destructive load to switch?
No load is the least destructive load to a switch.
Is a switch considered a load?
No, a switch is not considered a load in an electrical circuit. A switch controls the flow of electricity to the load (such as a light bulb or motor) by opening or closing the circuit. The load is the component in the circuit that consumes the electrical energy.
What happens when you connect the line wire from the switch to the load wire from the wall?
This is what the purpose of a switch is. It connects the "hot" wire to the load. When this is done the load becomes energized.
Where must the function switch be to load radio with comsec?
The switch to load the radio with comsec should be located on the radio itself. It may be a physical switch or button that needs to be activated to enable the comsec loading process.
When a switch is turned off should the load be zero?
The load will be zero after the switch is turned off. if power is still being drawn then the switch is quite likely faulty
What does switch leg mean?
The term switch leg really means switched leg. It is the wire that comes off of the bottom terminal of a switch and when the switch is turned on becomes hot. This is the leg that turns the load off and on.
Why the isolator should not closed with load?
Isolation switches can be closed with loads connected. The isolation switch should not be opened under load unless the switch is load rated. This information can be found on the isolation switch's cover as to the amount of current that can be safely interrupted.
How do you assign a switch to a lamp or load?
yes
What is offload device?
an off-load device a a switch where there is no current passing through it when its switched, a isolator is a off load device, a light switch is a on-load device because there is current passing through it when its switched.
What is the difference between a line and load in a light switch circuit?
In a light switch circuit, the line is the wire that brings power into the switch, while the load is the wire that carries power from the switch to the light fixture. The line wire is typically connected to the power source, while the load wire is connected to the light fixture.
How do you UNCHARGE a capacitor?
Connect it, in series, to a resistor or a dummy load and a switch. And then throw the switch.
