According to the 2000 Ford Windstar Owner Guide :
The front park / turn lamps take the ( 3157 NAK , amber bulb )
Check the fuse for the wipers and replace the turn signal bulb.
How do you change front signal bulb on 2000 acura RL
You should clarify your problem or question. Is it the front or rear signal light? Is the tail light coming on with the signal light? Are none of the lights coming on at all?
More than likely you have a burnt out bulb at the front signal light, rear signal light, or brake light on the right side.
Replacing a front signal turn bulb on a 2000 Chevy cavalier takes all abut a few minutes to complete. First find the housing for the turn signal which is located in the engine compartment. Pull back the bulb from the light housing and remove it from the clip. Lastly install the new light.
How do you replace a front turn signal bulb for a 2000 sts cadillac?"
There are 2 wiper motors on a Windstar: 1 for the front wipers and 1 for the rear.
Reach in from the bottom of the fascia. The socket takes about a quarter turn.
You can't - well, you can.. but the front bumper cover and the grill are all one piece
firewall 1-----2-----3 4-----5-----6 front of Ford Windstar
If its the front turn signal you open your hood and partly remove the black plastic cover on top of your headlights. Then you should see a screw on that screws on your signal light. Remove the screw and take off the the signal light and then remove the bulb.
The bulb has two filaments in it. 1. The parking light filament might be burned out. 2. The ground connection to the bulb might be bad (corroded socket?). This will make that signal light flash oppositely to the other signals when the headlights are on.