0
What else can I help you with?
Do all acid reactions give off heat?
Not all acid reactions give off heat. Some acid reactions are endothermic, meaning they absorb heat from the surroundings instead of releasing it. Examples of endothermic acid reactions include the reaction of citric acid with water.
product of neutralisation?
Acid + Basic ----> Salt + Water + Heat
What is the specific heat of linear alkylbenzene sulfonic acid?
The specific heat of linear alkylbenzene sulfonic acid is approximately 0.71 J/g°C.
What is the chemical term for uncoiling proteins dues to heat or acid?
proteins are typically DENATURED by heat or acid.
What is the type of bacteria that uses heat and acid for energy?
acetic acid
Is mordant used in acid fast stain?
Yes, a mordant is used in the acid-fast stain technique. The mordant used is heat to help drive the primary stain, usually carbol-fuchsin, into acid-fast bacteria, such as Mycobacterium species, which resist decolorization with acid-alcohol.
How does acid affect heat?
Acidic substances can affect heat by either increasing or decreasing the reaction rate of chemical reactions that involve heat. For example, strong acids like sulfuric acid can release heat when they react with water, while weaker acids like acetic acid (found in vinegar) can absorb heat when they dissolve in water. The impact of acids on heat depends on the specific acid and the reaction involved.
What happends when you heat an acid?
you get a chemical reaction.
Does uric acid get worse when heat is applied?
no
What is the specific heat of 20% sulphuric acid solution?
The specific heat capacity of a 20% sulfuric acid (H₂SO₄) solution can be estimated based on the specific heat capacities of its components (water and sulfuric acid) and their respective proportions in the solution. Here’s a step-by-step approach to estimate it: **Components in the Solution**: Sulfuric acid (H₂SO₄) Water (H₂O) **Specific Heat Capacities**: The specific heat capacity of water (H₂O) is approximately 4.186 J/g°C. The specific heat capacity of concentrated sulfuric acid (H₂SO₄) is around 1.38 J/g°C. **Calculation Method**: A 20% sulfuric acid solution means that for every 100 g of solution, there are 20 g of sulfuric acid and 80 g of water. **Estimation**: To estimate the specific heat capacity of the solution, you can use a weighted average based on the proportions of water and sulfuric acid: [ \text{Specific heat of solution} = (\text{% of water} \times \text{Specific heat of water}) + (\text{% of sulfuric acid} \times \text{Specific heat of sulfuric acid}) ] Given that 20% of the solution is sulfuric acid and 80% is water: [ \text{Specific heat of 20% sulfuric acid solution} = (0.80 \times 4.186) + (0.20 \times 1.38) ] Calculate the specific heat: [ \text{Specific heat of 20% sulfuric acid solution} = (3.3488) + (0.276) ] [ \text{Specific heat of 20% sulfuric acid solution} \approx 3.624 \text{ J/g°C} ] Therefore, the specific heat capacity of a 20% sulfuric acid solution is approximately **3.624 J/g°C**. This estimation assumes ideal mixing and that the specific heat capacities of water and sulfuric acid are accurate for dilute solutions around this concentration.
What is heat of dilution?
this the the heat released or absorbed when you dilute some liquid (for example diluting an acid with water to prepare a solution with lesser acid concentartion)
If heat is removed from lauric acid will it become solid?
Yes, lauric acid is a saturated fatty acid that typically exists as a solid at room temperature. Removing heat from lauric acid would cause it to solidify further.
